Tag Archives: helical worm gear motor

China OEM Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Root Cttig Machines helical worm gearbox

Product Description

 

Product Description

 

Product Description

-K Series Helical Bevel Gearbox

Product Features
1. Input mode: Coupled motor, belted motor, input shaft or connection flange.
2. Output: Right angle
3. Compact structure. Rigid tooth face. Carrying greater torque, high loading capacity.
4.High precision gear, ensuring the unit to operate stably, smooth transmission.
5. Low noise, long lifespan. Large overlap coefficient, abrasion resistant.

 

Product Parameters

1. Technical data

Size 38 48 58 68 78 88 98 108 128 158 168 188
Structure K      KA           KF          KAF        KAZ          KAT           KAB                        
Input power rating(kw) 0.18~3 0.18~3 0.18~5.5 0.18~5.5 0.37~11 0.75~22 1.3~30 3~45 7.5~90 11~160 11~200 18.5~200
Ratio 5.36~
106.38
5.81~
131.87
6.57~
145.15
7.14~4
4.79
7.22~
192.18
7.19~
197.27
8.95~
175.47
8.74~
141.93
8.68~
146.07
12.66~
150.03
17.35~
164.44
17.97~
178.37
Maximum Torque(N.m) 200 400 600 820 1550 2770 4300 8000 13000 18000 32000 50000
Weight 11 20 27 33 57 85 130 250 380 610 1015 1700

2: Design option
 

K series gear units are available in the following designs
KAZ..Y.. Short-flange-mounted helical-bevel gear units with hollow shaft
K…Y… Foot-mounted helical-bevel gear units with CZPT shaft
KAT…Y… Torque-arm-mounted helical-bevel gear units with hollow shaft
KAB…Y… Foot-mounted helical-bevel gear units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S… Shaft input helical-bevel gear units
KA…Y… Helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y… Combinatorial helical-bevel gear units
KF…Y… Flange-mounted helical-bevel gear units with CZPT shaft
KA(K, KF ,KAF ,KAZ)S…R… Shaft input combinatorial helical-bevel gear units
KAF…Y… Flange-mounted helical-bevel gear units with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y… When equipping the user’s motor or the special 1 ,the flange is required to be connected

Materials Data Sheet

 

Housing material

Grey Cast iron

Housing hardness

HBS163~255

Gear material

20CrMnTi alloy steel

Surface hardness of gears

HRC58°~62 °

Gear core hardness

HRC33~48

Input / Output shaft material

40Cr alloy steel

Input / Output shaft hardness

HRC32~36

Machining precision of gears

accurate grinding, 6~5 Grade

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Heat treatment

tempering, cementiting, quenching, normalizing, etc.

Efficiency

94%~96% (depends on the transmission stage)

Noise (MAX)

60~68dB

Temp. rise (MAX)

40°C

Temp. rise (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Brand of bearings

China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.

Brand of oil seal

NAK — ZheJiang or other brands requested

 

Detailed Photos

 

 

Our process of production

Our product line

 

Company Profile

 

Company Profile

Bode  was founded in 2007, which is located in HangZhou city, ZHangZhoug province. As 1 professional manufacturer and exporter, we have more than 17 years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have factory with advanced production and test equipment, the strong development of team and producing capacity offer our customers with high quality products. Our products widely served to various industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medicine, wooden etc. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any questions, good offer always for you for long term business.

FAQ

Q1: Are you trading company or manufacturer?
A: We are factory.

Q2: What kinds of gearbox can you produce for us?
A: Main products of our company: R, S, K, F series helical-tooth reducer, RV series worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as per custom drawing?
A: Yes, we offer customized service for customers.

Q4: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.

Q5: What information shall we give before placing a purchase order?
A:  a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
     b) Housing color.
     c) Purchase quantity.
     d) Other special requirements.

Q6: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.

Q7: What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery

If you are interested in our product, welcome to contact with us.
Our team will do our best to meet your need 🙂 
 

 

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Three-Step
Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

worm reducer

Worm gear reducer gearbox

A worm gear reducer gearbox is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.

Viscosity

A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer gearbox increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer gearbox. A worm gear reducer gearbox with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.

Self-locking function

Worm reducer gearboxes have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducer gearboxes is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducer gearboxes, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducer gearboxes are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer gearbox more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
worm reducer

application

The worm gear reducer gearbox market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducer gearboxes can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducer gearboxes are the most popular type of reducer gearbox. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.

cost

The cost of a worm gear reducer gearbox depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer gearbox market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer gearbox is a popular type of reducer gearbox. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer gearbox in multiple installation locations.
Another application for worm gear reducer gearboxes is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer gearbox is determined by several factors. Size and material are important. Worm gear reducer gearboxes can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
worm reducer

manufacturing

Agknx Transmission Ltd. manufactures premium worm gear reducer gearboxes with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer gearbox also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
China OEM Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Root Cttig Machines   helical worm gearboxChina OEM Right Angle Helical-Bevel Gear Motor Geared Reducer Gearbox for Root Cttig Machines   helical worm gearbox
editor by CX 2023-04-25

China S Series Helical Worm Variable Speed Gear Box with Motor worm gearbox china

Merchandise Description

 

Product Description

 

Item Description

-S Series Helical gearbox
 

 

Merchandise Features
one.Substantial modular design.
2.Integrated casting housing,compact dimension,substantial loading help, stable transmitting and lower sounds stage.
3.With the unique gear geometry, it gets high torque, performance and long existence circle.
four.It can attain the immediate mixture for 2 sets of gearbox.
5.High efficiency and help save electrical power.

six.Help save price and minimal routine maintenance.

 

Item Parameters

one. Technical data

Measurement 38 forty eight fifty eight 68 seventy eight 88 ninety eight
Framework BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) .eighteen~.75 .eighteen~1.5 .eighteen~three .25~5.five .55~7.5 .75~fifteen one.5~22
Ratio ten.27~165.71 11.46~244.74 10.78~196.21 11.55~227.twenty nine.ninety six~241.09 11.83~223.26 12.seventy five~230.forty eight
Permissible Torque(N.m) 90 a hundred and seventy 300 520 1270 2280 4000
Excess weight(kg) seven 10 14 26 fifty a hundred 170

2: Style alternative
 

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

 

Resources Information Sheet

Housing content

Grey Solid iron

Housing hardness

HBS163~255

Gear materials

20CrMnTi alloy metal

Area hardness of gears

HRC58°~sixty two °

Equipment main hardness

HRC33~48

Enter / Output shaft materials

40Cr alloy steel

Enter / Output shaft hardness

HRC32~36

Machining precision of gears

precise grinding, 6~5 Quality

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Heat treatment method

tempering, cementiting, quenching, normalizing, and many others.

Effectiveness

ninety four%~96% (is dependent on the transmission phase)

Sounds (MAX)

60~68dB

Temp. rise (MAX)

40°C

Temp. rise (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Brand of bearings

China prime brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.

Model of oil seal

NAK — ZheJiang or other manufacturers requested

 

Thorough Pictures

 

 

Our process of creation

 

 

Our product line

 

 

Business Profile

 

Firm Profile

Bode  was established in 2007, which is positioned in HangZhou metropolis, ZHangZhoug province. As 1 specialist producer and exporter, we have much more than seventeen years’ knowledge in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare components. We have factory with sophisticated generation and check tools, the sturdy development of group and creating capacity supply our consumers with high high quality products. Our merchandise extensively served to numerous industries of Metallurgy, Substances, lifting, mining, Petroleum, textile, medication, wooden and many others. Main marketplaces: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any concerns, very good offer often for you for extended term business.

FAQ

Q1: Are you investing firm or manufacturer?
A: We are manufacturing unit.

Q2: What sorts of gearbox can you generate for us?
A: Major products of our firm: R, S, K, F series helical-tooth reducer, RV collection worm equipment reducer,H Series Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as per custom drawing?
A: Sure, we provide customized service for consumers.

This fall: Can we buy 1 pc of every item for good quality tests?
A: Yes, we are happy to acknowledge trial order for top quality testing.

Q5: What data shall we give prior to putting a obtain order?
A:  a) Type of the gearbox, ratio, input and output kind, input flange, mounting place, and motor informationetc.
     b) Housing colour.
     c) Acquire amount.
     d) Other particular demands.

Q6: How lengthy is your delivery time?
A: Generally it is 5-ten days if the merchandise are in stock. or it is fifteen-20 days if the products are not in stock.

Q7: What is your conditions of payment ?
A: thirty% Advance payment by T/T after signing the agreement.70% before shipping

If you are fascinated in our merchandise, welcome to make contact with with us.
Our staff will do our ideal to fulfill your require 🙂 
 

 

US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested
US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

A-Drive PWC single worm reducer gearbox

A worm gear is a gear used to reduce the speed of a mechanical device. Often used in the automotive and shipbuilding industries, these gears have a lifespan comparable to many other types of reducer gearboxes. As a result, worm gears continue to be popular with engineers.
worm reducer

Agknx driver

Conical drive worm reducer gearboxes are an excellent choice for a variety of applications. The double-enveloping worm gear geometry of the Agknx Drive reducer gearbox provides a larger contact area and higher torque carrying capacity. This specialized gear system is also ideal for applications requiring higher precision.
Agknx Drive’s products are ideal for the solar, packaging, steel, food and pulp and paper industries. Additionally, Agknx Drive’s products are ideal for motion control and medium to heavy duty applications. The company’s dedicated sales and service teams are available to assist with your specific needs.
Agknx drive worm gear reducer gearboxes are available in single, double and triple reductions. Depending on the application, a single stage unit can transport up to 7,500 lbs. of torque. Its low-cost, compact design makes it a convenient option. Conical drive gearboxes are versatile and durable.
X & H

X & H worm gear units feature worm gear sets and are available in two different series. The X-Series includes XA versions with shaft and XF to XC versions with motor mounts. Compared to the XC compact series, the XF series offers outstanding versatility and higher efficiency. The H series combines the features of the X series with a spur gear pre-stage on the input. The H series has a die cast aluminum housing and cast iron shaft.
The X & H Worm reducer gearbox Series “H” helical gears are compatible with NMRV and C side input 56F wired motors. These gear reducer gearboxes are low cost and easy to install. They feature a cast iron housing and four threaded mounting holes.
RV seriese aluminum right angle

RV seriese aluminum right angle worm reduces versatility and durability. They are available in a variety of sizes including 25, 30, 40, 50, 63, 75, 110, 130, 150. Featuring standard NEMA motor input flanges and torque arm or foot mounting options, these reducer gearboxes are ideal for a variety of applications.
RV series worm gear reducer gearbox is made of high-quality aluminum alloy with compact structure. It also features light weight, corrosion resistance and low noise. Its housing is made of die-cast aluminum alloy, while the worm gear is made of 20CrM. The worm gear is heat treated by carbon quenching to increase its hardness. The thickness of the carbide layer is between 0.3-0.5mm.
These worm gear reducer gearboxes have multiple functions to maximize efficiency. In addition to being corrosion resistant, they are available in a variety of sizes to suit any application. Other features include a corrosion-resistant cast iron housing, enclosed breather, double-lip seal and magnetic drain plug. These worm gear reducer gearboxes are available with single or dual input shafts and are interchangeable with NMRVs.
Aluminum alloy right angle worm reducer gearbox is a light, durable and efficient gear reduction device. Its compact design makes it lighter than other gearheads, while its rust-resistant surface and long life make it an excellent choice for industrial and automotive applications. It is available in a variety of sizes, including inches.
worm reducerAGknx Single

Worm reducer gearboxes can be classified as sacrificial gears. It is used to reduce the torque of the machine. It has two parts: a worm and wheels. The worm can be made of brass or steel. Brass worm gears corrode easily. Phosphorus EP gear fluid can run on brass worm gears. It creates a thin oxide layer on the gear teeth, protecting them from impact forces and extreme mechanical conditions. Unfortunately, it can also cause serious damage to the brass wheels.
Worm reducer gearboxes work by transferring energy only when the worm is sliding. This process wears away the lubricating layer and metal of the wheel. Eventually, the worm surface reaches the top of the wheel and absorbs more lubricant. This process will repeat itself in the next revolution.
Worm reducer gearboxes have two benefits: they are compact and take up little space. They can slow down high-output motors while maintaining their torque. Another important feature of the worm gear reducer gearbox is its high transmission ratio capability. It can be installed in both vertical and horizontal positions, and a bidirectional version is also available.
Worm gears have some complications compared to standard gear sets, but overall they are reliable and durable. Proper installation and lubrication can make them sturdy, efficient devices.
A-Drive AGknx Single

If you’re considering purchasing a new worm gear reducer gearbox for your A-Drive AGknx single, you need to understand your goals. While single-stage worm reducer gearboxes can be used, their reduction ratios are often limited. In most cases, they can only achieve a reduction ratio of 10:1. However, there are other types of gears that provide additional speed reduction capabilities.
The worm reducer gearbox consists of two parts: the input worm and the output worm. Each component has its own rotational speed, the input worm rotates in a single direction and the output worm wheel rotates vertically. In a five-to-one ratio, the input worm rotates five times for each output worm. Likewise, a 60-to-1 ratio requires 60 revolutions of each worm. Due to this arrangement, the worm reducer gearbox is inefficient. Gear reduction is inefficient due to sliding friction rather than rolling friction.
Worm reducer gearboxes are also susceptible to thermal stress. They run hotter than hypoid reducer gearboxes, which reduces their useful life. In addition to higher heat, worm reducer gearboxes can experience component failure over time. In addition, an oil change is imminent due to the deterioration of lubrication.
The worm gear reducer gearbox of the A-Drive PPC single is a direct drive gearbox for personal watercraft. It has bronze bushings, aluminum gears, and a spool box. The spool box has a quarter-inch plated spool to wrap 1/4-inch 7 x 19 aircraft cable. Its design also makes it a more efficient alternative to belt-driven AGknx cranes.
worm reducerAGknx X & H

The AGknx X & H worm gear reducer gearbox series is a high-performance universal mount worm gear reducer gearbox. It features a spur gear primary on the input for higher performance and a wider range of gear ratios. Its design also allows it to be used with a variety of input shaft types, including shaft and closed-coupled applications.
It is available in a variety of sizes, including popular frame sizes 90 and 110. The worm shaft is made of case-hardened alloy steel with a cast iron hub and bronze ring gear. The standard output shaft is hollow. There are also models with dual single-shaft outputs.

China S Series Helical Worm Variable Speed Gear Box with Motor     worm gearbox chinaChina S Series Helical Worm Variable Speed Gear Box with Motor     worm gearbox china
editor by czh 2023-01-19

China Speed Reducer Gear Motor Geared Motor Unit Worm Helical Bevel Gearbox with Hollow Shaft for Sewing Machine Transmission Conponents double reduction worm gearbox

Product Description

Pace Reducer Equipment Motor Geared Motor Device Worm Helical Bevel Gearbox with Hollow Shaft for Sewing Equipment Transmission Conponents

US $10-999
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

US $10-999
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

Worm gear reducer gearbox

Cheaper than planetary gearboxes In many cases, worm gear reducer gearboxes are a popular alternative to planetary gearboxes. A worm gear reducer gearbox is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer gearbox is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer gearbox adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducer gearboxes are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.
worm reducer

pocket

The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer gearbox is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer gearbox to reduce vibration without damaging the output shaft.
Compact worm gear reducer gearboxes are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.

high efficiency

High-efficiency worm gear reducer gearboxes are ideal for applications that require precision, repeatability, and efficient performance. These reducer gearboxes are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducer gearboxes through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducer gearboxes are more efficient than their counterparts.
The high-efficiency worm reducer gearbox is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducer gearboxes include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducer gearboxes can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
worm reducer

low clearance

A low-clearance worm reducer gearbox is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducer gearboxes can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.

quieter

The quieter worm reducer gearbox is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducer gearboxes are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducer gearboxes are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducer gearboxes are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducer gearboxes can be upgraded to improve their performance by combining with other gear trains or gearboxes.
worm reducer

easy to replace

An easily replaceable worm gear reducer gearbox can save you a lot of money. A worm gear reducer gearbox is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducer gearboxes can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer gearbox. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducer gearboxes offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducer gearboxes is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducer gearboxes are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer gearbox for your equipment.
When replacing the worm gear reducer gearbox, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.

China Speed Reducer Gear Motor Geared Motor Unit Worm Helical Bevel Gearbox with Hollow Shaft for Sewing Machine Transmission Conponents     double reduction worm gearboxChina Speed Reducer Gear Motor Geared Motor Unit Worm Helical Bevel Gearbox with Hollow Shaft for Sewing Machine Transmission Conponents     double reduction worm gearbox
editor by czh 2023-01-04

China Transmission Motor Gearbox Unit Wp Nmrv Swl Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox double worm gearbox

Merchandise Description

Transmission Motor Gearbox Unit Wp Nmrv Swl Screw Generate Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Velocity Variator Gear Reducer Gearbox

Features

1. Compact composition and easy assembly
two. Vast pace ranges and higher torque
3. Lower sounds, excellent sealing functionality, large efficiency
four. Stable and risk-free, lengthy lifetime, universal
5. Multi-structure, numerous assembling approaches

 

Merchandise Pictures

 

Solution Description

 

                                                                                      ANG Helical Gear Reducer
Model R17 ~ 187, F37-177, K37-187, S37-97, HB01-26
Input power .06kw ~ 5000kw
Input velocity 750rpm ~ 3000rpm
Reduction ratio one/1.3 ~ 1/27000
Enter motor AC (1 phase or 3 section) / DC / BLDC motor
Put in type Foot / Solid shaft / Hollow shaft / Output flange…
Performance ninety four% ~ ninety eight % for R F K series
Material of housing die-solid aluminum / Cast iron / Stainless metal
Precision of equipment Precise grinding, class six
Warmth treatment Carburizing and quenching
Components Brake / Flange / Motor adapter / Torque arm …

Positive aspects

 

 

FAQ

 

Q: Can you make the gearbox with customization?
A: Of course, we can personalize for every your ask for, like power, voltage, velocity, shaft size, flange, terminal box, IP quality, etc.

Q: Do you provide samples?
A: Of course. The sample is offered for testing.

Q: What is your MOQ?
A: It is 1pcs for the beginning of our organization.

Q: What’s your lead time?
A: Standard solution want 5-30days, a little bit lengthier for personalized goods.

Q: Do you supply specialized help?
A: Of course. Our company have layout and advancement group, we can give technological assist if you
require.

Q: How to ship to us?
A: It is available by air, or by sea, or by teach.

Q: How to shell out the income?
A: T/T and L/C are desired, with a different forex, like USD, EUR, RMB, and so on.

Q: How can I know the solution is suitable for me?
A: >1ST affirm drawing and specification >2nd check sample >3rd start off mass creation.

Q: Can I come to your organization to go to?
A: Sure, you are welcome to visit us at any time.

Q: How shall we make contact with you?
A: You can send inquiry directly, and we will react within 24 several hours.
 

US $100-300
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery
Function: Change Drive Torque
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Samples:
US$ 300/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

                                                                                      ANG Helical Gear Reducer
Model R17 ~ 187, F37-177, K37-187, S37-97, HB01-26
Input power 0.06kw ~ 5000kw
Input speed 750rpm ~ 3000rpm
Reduction ratio 1/1.3 ~ 1/27000
Input motor AC (1 phase or 3 phase) / DC / BLDC motor
Install type Foot / Solid shaft / Hollow shaft / Output flange…
Efficiency 94% ~ 98 % for R F K series
Material of housing die-cast aluminum / Cast iron / Stainless steel
Precision of gear Accurate grinding, class 6
Heat treatment Carburizing and quenching
Accessories Brake / Flange / Motor adapter / Torque arm …
US $100-300
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery
Function: Change Drive Torque
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Samples:
US$ 300/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

                                                                                      ANG Helical Gear Reducer
Model R17 ~ 187, F37-177, K37-187, S37-97, HB01-26
Input power 0.06kw ~ 5000kw
Input speed 750rpm ~ 3000rpm
Reduction ratio 1/1.3 ~ 1/27000
Input motor AC (1 phase or 3 phase) / DC / BLDC motor
Install type Foot / Solid shaft / Hollow shaft / Output flange…
Efficiency 94% ~ 98 % for R F K series
Material of housing die-cast aluminum / Cast iron / Stainless steel
Precision of gear Accurate grinding, class 6
Heat treatment Carburizing and quenching
Accessories Brake / Flange / Motor adapter / Torque arm …

Advantages and disadvantages of worm gear reducer gearbox

If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.
worm reducer

Hollow shaft worm gear reducer gearbox

Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer gearbox

The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
worm reducer

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer gearbox

R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
worm reducer

AGKNX Electric Worm Gear reducer gearbox

AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China Transmission Motor Gearbox Unit Wp Nmrv Swl Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox     double worm gearboxChina Transmission Motor Gearbox Unit Wp Nmrv Swl Screw Drive Lifts Stepper Cyclo Cycloidal Extruder Helical Planetary Bevel Worm Speed Variator Gear Reducer Gearbox     double worm gearbox
editor by czh 2022-12-19

China Inline Worm Bevel Gear Motor Shaft Mounted Reducer Parallel Shaft Inline Coaxial Mining Crane Mining Suger Mill Helical Construction Gearbox with high quality

Item Description

Inline Worm Bevel Gear Motor Shaft Mounted Reducer Parallel Shaft Inline Coaxial Mining Crane Mining Suger Mill Helical Construction Gearbox

US $10-999
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

US $10-999
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China Inline Worm Bevel Gear Motor Shaft Mounted Reducer Parallel Shaft Inline Coaxial Mining Crane Mining Suger Mill Helical Construction Gearbox     with high quality China Inline Worm Bevel Gear Motor Shaft Mounted Reducer Parallel Shaft Inline Coaxial Mining Crane Mining Suger Mill Helical Construction Gearbox     with high quality
editor by czh 2022-12-02

China Custom Hollow Input Shaft Speed Reducer Worm Motor Gear Box High Torque Output Gearbox helical worm gearbox

Warranty: 1 many years
Applicable Industries: Constructing Substance Shops, Manufacturing Plant, Equipment Mend Stores, Food & Beverage Manufacturing facility, Printing Stores, Design works , Other, Advertising Company
Fat (KG): ten KG
Personalized assistance: OEM, ODM
Gearing Arrangement: Harmonic
Output Torque: in accordance each design
Enter Pace: 3500~8500 RPM
Output Velocity: 70~170 RPM
Item identify: Harmonic Gearbox
Software: Machine Tool
Variety: Harmonic Travel Robot
Ratio: 5-100
Search term: Reduction Gearbox
Mounting Situation: Horizontal (foot Mounted)
Materials: Solid Iron
Structures: Bearing + Gear + Box
Warmth remedy: Quenching
Gears Type: Metallic Gear
Packaging Particulars: Foam plastic and carton package deal
Port: HangZhou

Hollow Input Shaft Speed Reducer Worm Motor Gear Box Higher Torque Output Gearbox

Outline Dimensional
Variety
Input 2000r/min rated torque
Start&quit permissible CZPT torque
Typical load greatest allowable torque
Quick greatest allowable torque
Optimum allowable enter pace(r/min)
Allow typical enter pace(r/min)
Angular transmission precision
ZLSH-seventeen-50-HS
(N.m)
(N.m)
(N.m)
(N.m)
grease lubrication
grease lubrication
arc min
sixteen
39
28.five
77
8500
3500
one.five
Max backlash (arc sec)
Buckling torque(Nm)
D1*D2
J1
A aspect bolt tightened torque(N.m)
D3*D4
twenty
270
12*M3
Φ74
2
186
16*M3
J2
B aspect bolt tightened torque(N.m)
Φ54
two
176

Solution element
Major Product
Software
Company Info

Hollow Input Shaft Speed Reducer Worm Motor Equipment Box High Torque Output Gearbox
Packaging & Transport
FAQQ:Are you manufacturing facility?
A:Of course, we are manufacotry, and we generate Stepper motor and Gearbox reducer for a lot more than 16 a long time in China.

Q: What should I do, if I have no notion about parameter of motor and driver?
A:You should don’t worry, send the photo and software to our expert sale, and we will give you the very best suggestion.

Q: How lengthy is your merchandise quality guarantee?
A: We provide 1 12 months manufacturing unit top quality guarantee.

Q: How lengthy is your shipping time?
A: When the buy is confirmed, 7~fifteen workdays for the tiny get,15~twenty five workdays for the bulk.

Q:Can you offer you me OEM service?
A:Of course,we are obtained OEM and Customized,Nonetheless,you should give me far more request as you can.

Q:How to decide on ideal model?
A:You should supply a picture of the product you used prior to or recommend us your needs or some detail parameters, we will give recommendation.

Q:What is actually your MOQ?
A:Usually 1 piece. If more, we can discuss about price reduction. You can mix it with other CZPT machine elements delivery jointly .

Q: What is your conditions of payment ?
A: a hundred% in progress. Payment>=50000USD, 50% T/T in progress, balance prior to shipment .

Q: How does your QC work?
A: We have functionality examination ,Sampling take a look at ,routing check and acceptance take a look at.

Q:Why select your company?
A:We are a specialist Industrial Answers firm in China. we’re passed IS9001 worldwide high quality method certification the merchandise have respectively handed quality certification of CE, ROHS, FCC and so on. Our brand name good quality can be provide high price overall performance transmission handle goods for the planet industrial control.
Our Providers

What is a worm gear reducer?

The worm gear reducer is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
worm_reducerHollow shaft worm gear reducer

Worm gear reducer is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducers are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducers are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer is the multi-stage variety. This gear reducer has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer has low noise, low vibration and low energy consumption.
Worm gear reducers offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducers that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer has the characteristics of lower price and better torque output.
hourglass worm gear

The hourglass type worm gear reducer has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the hourglass worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The hourglass worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducers are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer stems from Sumitomo Heavy Industries’ extensive experience in gear reducers. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Hourglass worm gear reducers are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
worm_reducerDouble throat worm gear

There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear

The basic working principle of the brass worm gear reducer is the same as that of the traditional worm gear reducer. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducers are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducers with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducers are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer is designed for low to medium-horsepower applications. This gear reducer is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducers.
worm_reducerBrass worm gear

Brass worm gear reducer is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer also has the ability to generate high torque. However, it is important to understand that this gear reducer has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.

China Custom Hollow Input Shaft Speed Reducer Worm Motor Gear Box High Torque Output Gearbox     helical worm gearboxChina Custom Hollow Input Shaft Speed Reducer Worm Motor Gear Box High Torque Output Gearbox     helical worm gearbox

china manufacturer manufacturer Custom Energy Saving Helical Worm Gear Induction Motor with Three Phase manufacturers

Item Description

 

Solution Description

Product DESCRIPTION:
YS/Y2 Collection aluminium housing three-period asynchronous motors are newest design and style and are manufactured of selected top quality material and conform to the intercontinental IEC regular. YS motors have a extremely risk-free and dependable overall performance. They are attractive in look and can be effortlessly managed. They have low sound with small vibration. But at the very same time are mild with easy building. YS/Y2 motors can be utilised for all varieties of mechanical and industrial programs including machine instruments, pumps, air blowers, transmission products, mixers and so on.

Operation Circumstances:
Ambient temperature: -15C≤ θ ≤ 40C
Altitude: ought to be lower than 1000meters 
Rated voltage: 380V
Rated frequency: 50Hz
Link: CZPT -relationship for 3KW or significantly less while CZPT -link for 4KW or far more.
Duty/Ranking: Conntinuous(S1).
Insulation class: F
Defense class:IP54/ IP55.
Cooling technique: IC0141.

In depth Images

Item Parameters

TECHINICAL Knowledge:

Type Rated Output Rated CZPT Eff Power factor Rated Current locked torque maximum torque locked current
 rated torque  rated torque rated present
KW HP (r.p.m) (%) (cosθ) A Tst/Tn Tmax/Tn Ist/In
380V 50Hz synchronous CZPT 3000r/min(2 poles)
YS-5612 .09 1/eight 2680 62 .sixty eight .32 two.3 two.three six
YS-5622 .twelve 1/6 2660 sixty seven .seventy one .38 two.3 2.three 6
YS-6312 .18 1/4 2710 sixty nine .75 .53 2.three 2.3 6
YS-6322 .25 one/3 2730 seventy two .78 .68 two.three 2.3 6
YS-7112 .37 1/two 2760 73.five .eight .ninety six two.three two.three six
YS-7122 .55 3/four 2770 seventy five.5 .82 1.35 2.three 2.3 six
YS-8012 .75 one 2770 seventy six.five .85 1.75 2.two 2.three 6
YS-8571 1.one 1.five 2800 77 .eighty five two.fifty five two.two two.three 7
YS-90S-2 one.five 2 2840 seventy eight.five .85 three.42 two.two 2.3 7
YS-90L-2 two.two three 2840 81 .86 four.8 2.two two.3 7
YE2-100L-2 3 4 2890 84.6 .87 six.seventeen two.2 two.three seven.eight
YE2-112M-2 four 5.five 2910 eighty five.eight .88 eight.04 two.2 2.three eight.3
YE2-132S1-2 5.five 7.5 2930 87 .86 11.2 two two.three 8.3
YE2-132S2-2 seven.5 10 2840 88.one .88 fourteen.6 2 2.3 seven.nine
YE2-160M1-2 11 fifteen 2930 89.four .89 21 two two.three 8.1
YE2-160M2-two 15 20 2930 ninety.3 .89 28.4 2 two.3 eight.one
YE2-160L-2 18.five 25 2935 ninety.9 .89 34.seven 2 2.3 eight.two
YE2-180M-2 22 30 2940 91.3 .88 41.six 2 2.three eight.two
380V 50Hz synchronous CZPT 1500r/min(4 poles)
YS-5624 .09 one/8 1320 58 .sixty one .39 2.four two.4 6
YS-6314 .twelve 1/six 1350 sixty .63 .forty eight 2.4 2.four six
YS-6324 .eighteen one/4 1350 sixty four .66 .sixty five 2.4 2.four six
YS-7114 .twenty five 1/3 1350 sixty seven .68 .eighty three 2.4 two.four six
YS-7124 .37 1/2 1350 sixty nine.5 .seventy two one.12 2.4 2.4 six
YS-8014 .55 three/four 1380 73.five .73 1.fifty six 2.four two.four six
YS-8571 .seventy five 1 1390 75.5 .75 two.01 two.three 2.four 6.5
YS-90S-4 one.1 one.5 1400 seventy eight .78 two.seventy five two.3 2.4 6.5
YS-90L-four one.5 2 1400 79 .seventy nine three.sixty five 2.3 two.four 6.5
YE2-100L1-four two.two 3 1440 84.three .eighty one four.nine two.three 2.3 7.six
YE2-100L2-four three 4 1440 85.five .82 six.5 two.3 two.three 7.six
YE2-112M-4 four 5.five 1440 86.6 .eighty two eight.fifty six two.two two.three 7.eight
YE2-132S-four five.5 7.5 1450 87.7 .eighty three 11.five two 2.three 7.nine
YE2-132M-4 7.five 10 1450 88.seven .84 15.three two two.three seven.five
YE2-160M-four eleven 15 1460 89.8 .eighty four 22.two two.2 two.three 7.seven
YE2-160L-4 15 twenty 1460 ninety.six .85 29.six 2.2 2.three 7.8
YE2-180M-four eighteen.5 25 1470 91.two .86 35.eight 2 two.3 seven.eight
YE2-180L-four 22 thirty 1470 ninety one.6 .86 forty two.four 2 two.three seven.8
380V 50Hz synchronous CZPT 1000r/min(6 poles)
YS-7116 .18 1/4 910 fifty nine .sixty one .76 two two five.five
YS-7126 .25 one/three 910 sixty three .sixty two .97 two 2 5.five
YS-8016 .37 one/two 910 68 .62 1.33 two 2 five.5
YS-8026 .55 three/four 910 seventy one .sixty four one.84 2 two five.five
YS-90S-six .seventy five one 920 seventy three .sixty eight 2.3 two 2.one five.five
YS-90L-6 one.one one.5 920 seventy four .7 three.23 two 2.one 6
YE2-100L-six 1.five 2 940 seventy nine.eight .seventy five three.8 two 2.one six.5
YE2-112M-6 2.2 three 960 eighty one.8 .seventy six 5.38 2 two.one 6.6
YE2-132S-6 3 4 960 83.3 .seventy six seven.two two 2.1 6.eight
YE2-132M1-six four five.5 960 84.6 .76 9.45 2 2.one six.8
YE2-132M2-six five.five seven.five 960 86 .77 12.6 two 2.one seven
YE2-160M-six seven.five ten 970 87.2 .78 16.8 two 2.1 7
YE2-160L-6 eleven 15 970 88.seven .seventy eight 24.2 two two.one 7.two
YE2-180L-6 fifteen twenty 970 89.7 .81 31.four two two.one seven.three
380V 50Hz synchronous CZPT 750r/min(8 poles)
YS-7118 .09 one/8 600 40 .fifty seven .six 1.eight one.nine two.eight
YS-7128 .12 one/6 600 45 .57 .seventy one one.8 one.nine 2.8
YS-8018 .eighteen one/four 645 51 .sixty one .88 1.8 two three.three
YS-8571 .25 1/3 645 fifty four .sixty one one.fifteen one.eight two three.3
YS-90S-eight .37 one/two 670 62 .61 1.49 one.8 2 four
YS-90L-8 .fifty five 3/4 670 sixty three .61 two.seventeen 1.8 2.1 four

Firm Profile

About us:
We are a professional reducer maker situated in HangZhou, ZHangZhoug province.

Our major merchandise is  full selection of RV571-one hundred fifty worm reducers , also equipped hypoid CZPT cal gearbox, Laptop units, UDL Variators and AC CZPT s.
Goods are widely used for purposes this sort of as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-creating, building machinery, metallurgic mine, environmental safety CZPT , and all sorts of automated strains, and assembly lines.
With CZPT shipping and delivery, exceptional after-product sales service, CZPT d producing facility, CZPT goods offer well  both at residence and overseas. We have exported CZPT reducers to CZPT Asia, CZPT ern CZPT pe and the Middle CZPT and so on.Our aim is to develop and innovate on the foundation of substantial good quality, and develop a good status for reducers.

We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Earn Eurasia

Logistics

Packing details:Plastic Luggage+Cartons+Picket Situations , or on request

Following Product sales Provider

one.Routine maintenance Time and Guarantee:In one particular 12 months following getting goods.
two.Other SupportIncluding modeling choice guidebook, set up information, and dilemma resolution guidebook, etc.

FAQ

one.Q:Can you make as per CZPT er drawing?

   A: Indeed, we offer CZPT ized service for CZPT ers accordingly. We can use CZPT er’s nameplate for gearboxes.
two.Q:What is your conditions of payment ?
   A: 30% deposit before creation,equilibrium T/T ahead of delivery.
3.Q:Are you a trading firm or maker?
   A:We are a manufacurer with CZPT d tools and skilled personnel.
4.Q:What is your MOQ?
   A: 1 pcs
5.Q:Free of charge sample is CZPT or not?
   A:Indeed, we can source free of charge sample if CZPT er agree to shell out for the courier price
6.Q:Do you have any certificate?
   A:Yes, we have CE certificate and SGS certificate report.
Make contact with information:
Ms Lingel Pan
For any concerns just truly feel free of charge ton contact me. A lot of many thanks for your variety focus to CZPT organization!

We are seasoned transmission dealers and offer a broad range of transmissions, an essential part of several push systems. Gearboxes can be utilized to minimize or boost speed, improve torque, reverse or alter the direction of a drive shaft. Gearboxes are also acknowledged as equipment drives, velocity reducers, equipment motors, velocity reducers and gear reducers.
china  manufacturer  manufacturer  Custom Energy Saving Helical Worm Gear Induction Motor with Three Phase manufacturers

china near me AC Gear Motor with Worm and Helical Gears manufacturers

Solution Description

Merchandise Description

one. CZPT type: Permanent magnet DC
two. Rated velocity: 2200rpm-3500rpm
3. CZPT : IP44, IP55
4. Voltage: 24V
5.Equipment Ratio: 7251
6.Output pace: 2-3 rpm
7. Output CZPT : 350W on this DC motor type
8. Gearbox: worm and wheel
9. Insulation: Course F
ten. Effectiveness: sixty five%
 

Product Parameters

 

 

 

Comprehensive Photos

 

FAQ

 

Q: How to buy?
A: ship us inquiry → receive CZPT quotation → negotiate particulars → confirm the sample → sign contract/deposit → mass creation → cargo all set → balance/shipping → further cooperation.

Q: How about Sample buy?
A: Sample is CZPT for you. please speak to us for information. Contact us

Q: Which delivery way is avaliable?
A: DHL, UPS, FedEx, TNT, EMS, CZPT Publish,Sea are CZPT .The other shipping and delivery ways are also CZPT , you should speak to us if you need to have ship by the other shipping and delivery way. 

Q: How CZPT is the provide?
A: Devliver time is dependent on the quantity you buy. normally it requires fifteen-twenty five functioning times.

Q: My package deal has missing merchandise. What can I do?
A: Make sure you contact CZPT support team and we will affirm your get with the package deal contents.We apologize for any inconveniences. 

Q: How to verify the payment?
A: We accept payment by T/T, PayPal, the other payment ways also CZPT acknowledged,Make sure you get in touch with us before you pay out by the other payment methods. Also thirty-50% deposit is CZPT , the harmony funds must be paid just before delivery.
 

Equipment reducers, also called reducers, appear in several transmission styles and are made to multiply torque and minimize input speed to a preferred output velocity. The major gain of inline gearboxes is their potential to preserve management in applications involving higher rotational speeds. Their effectiveness and capability to supply substantial input speeds with minimal backlash make inline reducer gearboxes best for a wide assortment of motion management programs
china  near me AC Gear Motor with Worm and Helical Gears manufacturers

china near me shop Ye2 Series CCC CE SGS High Efficiency Three Phase Worm Helical Gear Electric Motor manufacturers

Product Description

 

Merchandise Description

Item DESCRIPTION:
YS/Y2 Collection aluminium housing three-period asynchronous motors are latest design and style and are produced of selected good quality content and conform to the intercontinental IEC normal. YS motors have a really risk-free and dependable overall performance. They are attractive in look and can be effortlessly managed. They have lower noise with small vibration. But at the same time are light-weight with simple development. YS/Y2 motors can be utilised for all sorts of mechanical and industrial purposes including machine instruments, pumps, air blowers, transmission gear, mixers and so on.

Operation Circumstances:
Ambient temperature: -15C≤ θ ≤ 40C
Altitude: ought to be decrease than 1000meters 
Rated voltage: 380V
Rated frequency: 50Hz
Link: CZPT -connection for 3KW or significantly less whereas CZPT -link for 4KW or more.
Responsibility/Score: Conntinuous(S1).
Insulation class: F
Security class:IP54/ IP55.
Cooling strategy: IC0141.

Comprehensive Pictures

Merchandise Parameters

TECHINICAL Knowledge:

Type Rated Output Rated CZPT Eff Power element Rated Recent locked torque greatest torque locked present
 rated torque  rated torque rated recent
KW HP (r.p.m) (%) (cosθ) A Tst/Tn Tmax/Tn Ist/In
380V 50Hz synchronous CZPT 3000r/min(2 poles)
YS-5612 .09 1/eight 2680 sixty two .sixty eight .32 2.3 two.three 6
YS-5622 .twelve 1/6 2660 sixty seven .seventy one .38 2.3 2.3 six
YS-6312 .eighteen 1/4 2710 69 .75 .53 two.three 2.three 6
YS-6322 .25 one/3 2730 seventy two .78 .sixty eight two.three two.three six
YS-7112 .37 1/two 2760 73.five .8 .ninety six 2.3 two.three 6
YS-7122 .fifty five 3/4 2770 seventy five.5 .eighty two one.35 2.three two.three 6
YS-8012 .seventy five 1 2770 seventy six.five .85 one.75 2.two 2.three 6
YS-8571 1.1 1.five 2800 seventy seven .85 2.fifty five two.two 2.three seven
YS-90S-2 1.five two 2840 seventy eight.5 .eighty five 3.forty two 2.two two.three seven
YS-90L-2 two.two 3 2840 eighty one .86 four.8 two.two 2.3 7
YE2-100L-two 3 4 2890 eighty four.six .87 6.seventeen 2.two 2.3 seven.8
YE2-112M-two four five.5 2910 eighty five.8 .88 8.04 two.two two.three 8.three
YE2-132S1-two 5.5 seven.five 2930 87 .86 eleven.2 2 two.three eight.3
YE2-132S2-two 7.five 10 2840 88.one .88 fourteen.six 2 two.three seven.9
YE2-160M1-2 11 15 2930 89.4 .89 21 two 2.3 eight.1
YE2-160M2-2 15 twenty 2930 90.three .89 28.four 2 2.three 8.one
YE2-160L-two eighteen.5 25 2935 ninety.9 .89 34.seven 2 2.three 8.2
YE2-180M-two 22 thirty 2940 ninety one.three .88 forty one.6 two two.3 8.2
380V 50Hz synchronous CZPT 1500r/min(4 poles)
YS-5624 .09 1/8 1320 58 .sixty one .39 two.4 2.four 6
YS-6314 .12 1/six 1350 60 .63 .48 2.four 2.4 6
YS-6324 .18 1/4 1350 64 .sixty six .65 two.four 2.4 six
YS-7114 .twenty five 1/3 1350 sixty seven .68 .83 2.4 2.4 six
YS-7124 .37 1/two 1350 69.5 .seventy two one.12 2.4 2.4 six
YS-8014 .55 3/4 1380 seventy three.five .73 1.fifty six two.four two.four six
YS-8571 .seventy five 1 1390 75.five .75 2.01 2.three two.four six.5
YS-90S-four 1.one one.5 1400 seventy eight .78 2.75 two.three 2.four six.5
YS-90L-four one.5 two 1400 seventy nine .79 three.65 2.three 2.4 6.5
YE2-100L1-4 two.2 3 1440 eighty four.3 .81 4.9 2.3 2.three seven.6
YE2-100L2-4 three four 1440 85.5 .eighty two six.five two.three two.3 7.six
YE2-112M-4 4 five.five 1440 86.6 .82 8.fifty six 2.2 two.3 seven.eight
YE2-132S-4 5.5 7.5 1450 87.7 .83 11.five 2 two.3 seven.nine
YE2-132M-four 7.5 ten 1450 88.7 .eighty four 15.3 two 2.3 7.five
YE2-160M-four eleven fifteen 1460 89.eight .eighty four 22.two two.two 2.three 7.7
YE2-160L-4 fifteen twenty 1460 90.six .85 29.6 2.2 2.three seven.8
YE2-180M-4 18.5 25 1470 ninety one.two .86 35.eight 2 2.three 7.eight
YE2-180L-4 22 thirty 1470 91.six .86 forty two.four two 2.three 7.8
380V 50Hz synchronous CZPT 1000r/min(6 poles)
YS-7116 .eighteen 1/four 910 59 .sixty one .76 2 two 5.five
YS-7126 .25 1/3 910 sixty three .62 .ninety seven two two 5.5
YS-8016 .37 one/two 910 68 .62 1.33 two two 5.5
YS-8026 .55 three/four 910 seventy one .64 one.eighty four 2 2 five.five
YS-90S-six .seventy five 1 920 73 .68 two.3 two 2.1 5.five
YS-90L-six 1.1 1.5 920 seventy four .7 three.23 two two.1 six
YE2-100L-six one.5 two 940 seventy nine.eight .seventy five 3.eight two 2.1 6.5
YE2-112M-six two.2 three 960 eighty one.8 .seventy six 5.38 2 two.one six.six
YE2-132S-6 three four 960 eighty three.3 .76 7.two 2 2.one six.eight
YE2-132M1-6 4 five.5 960 84.6 .76 nine.45 two 2.1 6.eight
YE2-132M2-six 5.5 seven.5 960 86 .77 12.six two two.1 seven
YE2-160M-six 7.5 10 970 87.2 .78 sixteen.8 2 two.1 7
YE2-160L-6 11 fifteen 970 88.7 .78 24.2 2 two.1 seven.2
YE2-180L-6 15 20 970 89.7 .81 31.four two 2.one seven.3
380V 50Hz synchronous CZPT 750r/min(8 poles)
YS-7118 .09 1/8 600 forty .fifty seven .six 1.8 1.9 2.eight
YS-7128 .twelve 1/6 600 45 .fifty seven .seventy one 1.eight one.9 two.eight
YS-8018 .eighteen 1/four 645 fifty one .61 .88 one.8 two three.3
YS-8571 .25 1/3 645 54 .61 1.fifteen 1.eight 2 3.three
YS-90S-8 .37 1/2 670 62 .61 one.forty nine 1.8 2 four
YS-90L-8 .55 3/4 670 63 .61 2.17 one.8 two.one four

Company Profile

About us:
We are a professional reducer manufacturer situated in HangZhou, ZHangZhoug province.

Our foremost products is  full range of RV571-150 worm reducers , also supplied hypoid CZPT cal gearbox, Pc units, UDL Variators and AC CZPT s.
Goods are broadly used for programs this sort of as: foodstuffs, ceramics, packing, chemical substances, pharmacy, plastics, paper-creating, construction equipment, metallurgic mine, environmental defense CZPT , and all types of automated strains, and assembly lines.
With CZPT shipping, exceptional following-sales provider, CZPT d creating facility, CZPT items offer well  both at residence and overseas. We have exported CZPT reducers to CZPT Asia, CZPT ern CZPT pe and the Middle CZPT and so on.Our aim is to produce and innovate on the foundation of higher top quality, and produce a good status for reducers.

We take part Germany Hannver Exhibition-ZheJiang PTC Reasonable-Turkey Win Eurasia

Logistics

Packing info:Plastic Bags+Cartons+Wooden Circumstances , or on ask for

Soon after Revenue Service

1.Maintenance Time and Warranty:In a single year soon after acquiring merchandise.
two.Other ServicesSuch as modeling choice manual, set up guidebook, and dilemma resolution information, etc.

FAQ

one.Q:Can you make as per CZPT er drawing?

   A: Yes, we supply CZPT ized support for CZPT ers accordingly. We can use CZPT er’s nameplate for gearboxes.
2.Q:What is your phrases of payment ?
   A: 30% deposit ahead of generation,harmony T/T prior to supply.
three.Q:Are you a trading company or maker?
   A:We are a manufacurer with CZPT d equipment and knowledgeable staff.
four.Q:What is your MOQ?
   A: 1 pcs
5.Q:Cost-free sample is CZPT or not?
   A:Yes, we can source free of charge sample if CZPT er concur to shell out for the courier price
six.Q:Do you have any certification?
   A:Of course, we have CE certification and SGS certification report.
Contact information:
Ms Lingel Pan
For any questions just really feel free ton get in touch with me. Several many thanks for your variety interest to CZPT firm!

We are experienced transmission dealers and provide a vast selection of transmissions, an important element of a lot of push systems. Gearboxes can be utilized to minimize or enhance pace, enhance torque, reverse or adjust the course of a drive shaft. Gearboxes are also identified as gear drives, speed reducers, gear motors, velocity reducers and equipment reducers.
china  near me shop Ye2 Series CCC CE SGS High Efficiency Three Phase Worm Helical Gear Electric Motor manufacturers

china factory Right Angle Shaft Helical Gear Motor Combination with Worm Wheel manufacturers

Merchandise Description

 

In depth Pictures

Solution Description

Large modular design and style, biomimetic floor with owned mental property appropriate.Adopt German worm hob to approach the worm wheel.
With the special gear geometry, it receives higher torque, performance and CZPT life circle.It can attain the direct mixture for two
sets of gearbox.
Mounting method: foot mounted, flange mounted, torque arm mounted.Output shaft: reliable shaft, hollow shaft.

 

Item Parameters

 

Technological information:

Housing content

Solid iron/Ductile iron

Housing hardness

HBS190-240

Gear material

20CrMnTi alloy steel

Area hardness of gears

HRC58°~sixty two °

Gear main hardness

HRC33~forty

Enter / Output shaft materials

42CrMo alloy steel

Enter / Output shaft hardness

HRC25~30

Machining precision of gears

correct grinding, 6~5 Quality

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Warmth treatment method

tempering, cementiting, quenching, and so on.

Efficiency

ninety four%~ninety six% (depends on the transmission stage)

Sounds (MAX)

sixty~68dB

Temp. increase (MAX)

40°C

Temp. increase (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Model of bearings

China top model bearing, HRB/LYC/ZWZ/C&U. Or other brand names asked for, CZPT , FAG, CZPT , NSK.

Brand of oil seal

NAK — ZheJiang or other brands requested

Our Positive aspects

 

Packaging & CZPT

 

 

Certifications

Business Profile

Xihu (West CZPT ) Dis.ng Transmission Tools Co., Ltd. positioned HangZhou city, ZHangZhoug, as one specialist producer
and exporter of cycloidal pin wheel reducer,worm reducer, equipment reducer, gearbox , AC motor and relative spare
areas, owns rich experience in this line for numerous several years.

We are 1 immediate factory, with CZPT d production tools, the sturdy development staff and making
potential to offer you quality merchandise for CZPT ers.

Our merchandise extensively served to CZPT industries of CZPT lurgy, CZPT s, textile,medication,wood etc. Principal
marketplaces: CZPT , Africa,Australia,Vietnam, Turkey,Japan, Korea, Philippines…

Welcome to request us any queries, great supply always for you for CZPT expression enterprise.

 

FAQ

Q: Are you trading firm or producer?
A: We are manufacturing facility.
 

Q: How CZPT is your shipping time?
A: Generally it is 5-10 times if the products are in stock. or it is 15-20 times if the merchandise are not in stock.
 

Q: Can we acquire 1 computer of every product for quality tests?
A: Yes, we are glad to settle for trial get for quality testing.

Q:How to select a gearbox which meets your prerequisite?
A:You can refer to CZPT catalogue to select the gearbox or we can assist to pick when you supply
the complex information of essential output torque, output speed and motor parameter and so on.

Q: What info shall we give just before positioning a acquire buy?
A:a) Sort of the gearbox, ratio, input and output type, input flange, mounting place, and motor informationetc.
b) Housing color.
c) Acquire quantity.
d) CZPT unique specifications. 

These compact, light-weight, reduced backlash inline equipment reducers were initially made for encoder programs. They are also ideal for many other generate systems. Encoder gear reducers have a really reduced instant of inertia at the shaft input and are rated for input speeds up to 3000 rpm. Two frame sizes are accessible with gear ratios from 4.96:1 to 3600:1. Our encoder gearbox sync pads are obtainable from stock.
china  factory Right Angle Shaft Helical Gear Motor Combination with Worm Wheel manufacturers