![DC Brush Series Wound Motor for Hydraulic System and Lift DC Brush Series Wound Motor for Hydraulic System and Lift](http://img.hzpt.com/uploads/images/ZHMedical/motor-base-1.jpg)
DC Brush Series Wound Motor for CZPT Method and Lift
PG36M555 Series
voltage: 3VDC 6VDC 9VDC 12VDC 24VDC
Speed range: 3000-9500rpm
power: 3.three-13w
Normal purposes: Central air-conditioning valve, Amusement products, Coin
Refund units, Grill, Oven, Peristaltic pumps, ATM lender
Automatic method, Robot, Health-related equipment, Workplace
Equipment, Family appliances, Computerized actuator.
Excess weight: 320~400g/PCS(approx)
Packing particulars: CTN measurement: 32X28XH26cm 40PCS/CTN G. W. 16Kgs
Gearbox knowledge: |
|
Amount of stages |
1stages reduction |
two stages reduction |
three levels reduction |
four phases reduction |
five stages reduction |
Reduction ratio |
three.seventy five.two |
thirteen.719.226.nine |
fifty.971.299.5139 |
188264369516721 |
6699771367191126723736 |
gearbox length ” L” mm |
26.4 |
32.6 |
38.9 |
45.three |
52.5 |
Max.Working torque |
three.0Kgf @ cm |
six.0Kgf @ cm |
8.0Kgf @ cm |
12.0Kgf @ cm |
20Kgf @ cm |
Max. Gear breaking torque |
nine.0Kgf @ cm |
18.0Kgf @ cm |
24Kgf @ cm |
36Kgf @ cm |
60Kgf @ cm |
Max. Gearing efficiency |
90% |
81% |
73% |
65% |
59% |
|
|
Motor knowledge: |
|
Motor identify |
Rated volt.v |
No load |
Load torque |
Stall torque |
Recent |
Velocity |
Current |
Velocity |
Torque |
Output energy |
Torque |
Existing |
mA |
r/min |
mA |
r/min |
gf @ cm |
W |
gf @ cm |
mA |
RS-555123000 |
twelve |
≤140 |
3000 |
≤800 |
2200 |
a hundred and fifty |
three.three |
600 |
3000 |
RS-555124500 |
twelve |
≤220 |
4500 |
≤1200 |
3300 |
220 |
7.2 |
880 |
7800 |
RS-555126000 |
twelve |
≤350 |
6000 |
≤2000 |
4500 |
three hundred |
thirteen.5 |
1200 |
6000 |
RS-555243000 |
24 |
≤70 |
3000 |
≤400 |
2200 |
one hundred fifty |
three.three |
600 |
1600 |
RS-555244500 |
24 |
≤110 |
4500 |
≤600 |
3300 |
220 |
7.2 |
880 |
3000 |
RS-555246000 |
24 |
≤180 |
6000 |
≤1000 |
4500 |
300 |
thirteen.five |
1200 |
4000 |
1This table lists some motors parameters, other folks make sure you refer to particular parameters of rs-555.htm” 2Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X gearing efficiencyoutput pace:motor velocity / reduction ratio. |
|
|
NOTE: |
1 Gearmotor named strategies: e . g . SG-555123000-ninety nine.5K Motor you should refer to the motor information RS-555123000. Gearbox make sure you refer to gearbox information reduction ratio99.five .Associated to gearmotor output velocity and torque please refer to motor data. 2 Motor can be put in wiht magnetic encorder. encorder parameters please refer to me-37.htm . 3CZPT output shaft following lowering: 8.0mm. other measurements of then output shaft can make as customer request. 4Chart only for reference,items shall prevail the entity. |
|
Business Introduction
![DC Brush Series Wound Motor for Hydraulic System and Lift DC Brush Series Wound Motor for Hydraulic System and Lift](http://img.hzpt.com/uploads/images/ZHMedical/motor-base-2.jpg)