We – EPG Team the most significant gearbox & motors , couplings and gears factory in China with 5 different branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
hot sale with Ce SGS ISO9001 55L Banbury Kneader/rubber kneader device
Mixing chamber:
It consists of a “W” condition entire body and two aspect boards manufactured of large top quality steel plates by indicates of extrusion forming and welding, which are jacked to consider the circulation of cooling drinking water or steam. It is plated with hard chrome on its internal walls.
Thermal Resistance:
There is a plug-in thermal resistance in center segment of the base of the chamber to be related to electrical technique to examine and display the temperate.
Rotor:
It is designed to the hollow blades of Banbury type. The hollows are connected with axial hole of rotor shaft employed as cooling or heating passage. The top edges of blades and the end faces of ~ rotor shaft are surface welded with cobalt-foundation difficult alloy and grinding, then plating with tough chrome and sharpening.
Cooling/heating method:
A frequent piping method is adopted for either cooling or heating content in mixing procedure. Via the system cooling drinking water or steam is fed in three methods to the cavities of the rotors blades, the mixing chamber and the top ram.
Tilting system:
It is made up of a rotor with brake, cycloidal equipment reducer, TP type worm and worm gear, and so on…It is ready to actuate the mixing chamber tilting by 140° About the entrance rotors.
Dust sealing device:
At the joint in between the leading of the mixing chamber and the cantilevered arm of the machine frame, the dust sealing assemblies with curved slotted partings are utilized obtaining an exceptional and trustworthy sealing objective.
The stop encounter of the rotor is sealed by conclude make contact with sealing with nor oil-lubrication and is seals well and is put on-resistant and resilient.
Primary driving program:
The element is made up with main motor, reducer, connecting gears. It realizes odd-speed rotation of the rotors with running experience one particular other.
Pneumatic control method:(the motor is Siemens brand)
Pneumatic handle technique is managed by XG buy. The bi-directional air cylinder can make the ram up or down. In case the over load happens in the mixing chamber, the prime ram can be raised immediately or manually if required, so as to shield motor from overload.
Electric powered handle program:
Imported PLC device and electrical management factors which are all imported products or imported technology goods are adopted in the electrical handle system as to elevate control reliability.
Benefits:
(1)Highest Dispersion & High Creation
Double blades, suitable clearance & high cooling impact presents exceptional dispersion , Its creation is 4 to 5 times thus conserving on labor and the electricity about 30%.
(2)No Foundation Requirement
The Kneader has a common bed plate for all parts and not require basis.
(3)Straightforward Cleansing & Colour Adjust
Mixing chamber can be tilted which enables simple cleansing, because of this, different colored compounds can be created with out difficulties.
About us:
We,HangZhou Create ept ept Co., Ltd.make excellent high quality rubber equipment, from components to creating, we use the good quality materials, complete management method, also excellent following sale services, we hope to be one reliable factory for you!
Complex Parameters:
| Inner Mixer Model No. | X(S)N-35×30 | X(S)N-55×30 | X(S)N-75×30 | X(S)N-110×30 |
| Whole volume of mixing chamber(L) | seventy five | a hundred twenty five | 170 | 250 |
| Wor ept volume of mixing chamber(L) | 35 | fifty five | seventy five | one hundred ten |
| Driving motor electricity(kW) | fifty five | seventy five | 110 | 185 |
| Tilting motor power(kW) | two.2 | 2.2 | four | 5.5 |
| Tilting angle(°) | one hundred forty | a hundred and forty | 140 | a hundred and forty |
| Rotational velocity of the rotor (front /rear)(r/min) | 30/24.5 | 30/24.5 | thirty/24.5 | thirty/24.5 |
| Stress of compressed air(MPa) | .5~.8 | .6~.8 | .6~.8 | .6~.eight |
| Potential of compressed air(m3/min) | ≥0.9 | ≥1. | ≥ 1. | ≥1.5 |
| Force of cooling water (rubber mixing )(MPa) | .3~.four | .3~.four | .3~.4 | .3~.four |
| Force of heating steam (plastics mixing )(MPa) | .5~.eight | .5~.8 | .5~.8 | .5~.eight |
| Proportions(L * W *H)(mm) | 3200*1900*2950 | 3230*1927*2958 | 3325*2615*3105 | 4075*2712*3580 |
| Gross weight(t) | ~6.3 | ~7.one | ~9.5 | ~14.nine |
photographs:
The use of original gear manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our firm and the shown substitution parts contained herein are not sponsored, accepted, or produced by the OEM.
