Product Description
Product Parameters
Model No.: KM-22X130-256-2455.5
Size details:
- Motor Diameter: φ22.0mm
- Motor housing length: 25.1mm
- Shaft length: customization
Specifications:
| Ratio | Model | Voltage | No Load | At Maximum Efficiency | AT Stall | |||||||
| Operating Range | Nominal | Speed | Current | Speed | Current | Torque | Output | Torque | Current | |||
| V | V | r/min | A | r/min | A | Kgf.cm | W | Kgf.cm | A | |||
| 1/96 | KM-22X130-96-1285.7 | 6.0-12.0 | 12.0 | 85.7 | 0.071 | 43.6 | 0.42 | 3 | / | 6.107 | 0.78 | |
All technical data can custom made for different application.
Other Customized items:
- DC motor, gearbox motor, vibration motor, automotive motor.
- Accessories offered like encoder, gear, worm, wire, connector.
- Ball-bearing or Oil-impregnated bearing.
- Shaft configuration(multi-knurls,D-cut shape, four-knurls etc).
- Metal end cap or plastic end cap.
- Precious metal brush/ carbon brush.
Detailed Photos
Application
Certifications
Packaging & Shipping
Company Profile
Our Advantages
FAQ
1.What kind of motor do you supply?
Kinmore specializes in making DC motors & gear motors with the diameter ranging from 6mm-80mm; automotive motors and vibration motors are our strength area, too; we also provide brushless motors.
2.What’s the lead time for samples or mass production?
Normally, it takes 15-25 days to produce samples; about mass production, it will take 35-40 days for DC motor production and 45-60 days for gear motor production.
3.Could you mind sending the quotation for this motor?
For all of our motors, they are customized based on different requirements. We will offer the quotation soon after you send your specific requests and annual quantity.
4.Do you offer some kinds of accessories like encoder, PCB, connector, soldering wired for the motor?
We specialize in motors, instead of accessories. But if your annual demand reaches a certain amount, we will apply to the engineer for offering the accessories.
5.Are your motors certificated with UL, CB Tüv, CE?
All of our motors are UL, CB Tüv, CE compliant, and all our items are making under REACH and ROHS. We could provide motor’s exploring drawing and BOM for your products UL certificated. We also could make motors built-in filters based on your EMC directive for your EMC passing.
| Application: | Universal, Industrial, Household Appliances, Car, Power Tools |
|---|---|
| Operating Speed: | Low Speed |
| Excitation Mode: | Compound |
| Function: | Control, Driving |
| Casing Protection: | Open Type |
| Number of Poles: | 2 |
| Customization: |
Available
|
|
|---|
Worm gear reducer gearbox
A worm gear reducer gearbox is a gear reducer gearbox that uses a worm gear train to reduce the required force. Unlike traditional gear reducer gearboxes, these units are small and require low horsepower ratings. This reduces their efficiency, but their low cost and compact design help make up for this shortcoming. However, these gear reducer gearboxes have some drawbacks, including their tendency to lock up when reversing.
high efficiency
High-efficiency worm reducer gearboxes are ideal for applications where high performance, repeatability, and accuracy are critical. It consists of an input hypoid gear and an output hypoid bevel gear. The input worm rotates perpendicular to the output worm, so for every revolution of the input worm, the output gear makes one revolution. This arrangement reduces friction (another source of energy loss) in a high-efficiency worm gear to at least two arc minutes.
Compared with worm gear reducer gearboxes, hypoid gearmotors offer several advantages, including lower operating costs and higher efficiency. For example, hypoid gear motors can transmit more torque even at high reduction ratios. Also, they are more efficient than worm gear reducer gearboxes, which means they can produce the same output with a smaller motor.
In recent years, the efficiency of worm gear reducer gearboxes has been dramatically improved. Manufacturers have made great strides in materials, design, and manufacturing. New designs, including dual-enveloping worm gear reducer gearboxes, increase efficiency by 3 to 8 percent. These improvements were made possible through countless hours of testing and development. Worm gear reducer gearboxes also offer lower initial costs and higher overload capability than competing systems.
Worm gear reducer gearboxes are popular because they provide maximum reduction in a small package. Their compact size makes them ideal for low to medium-horsepower applications and they are reticent. They also offer higher torque output and better shock load tolerance. Finally, they are an economical option to reduce the device’s power requirements.
low noise
Low-noise worm gear reducer gearboxes are designed to reduce noise in industrial applications. This type of reducer gearbox uses fewer bearings and can work in various mounting positions. Typically, a worm reducer gearbox is a single-stage unit with only one shaft and one gear. Since there is only one gear, the noise level of the worm gear reducer gearbox will be lower than other types.
A worm gear reducer gearbox can be integrated into the electric power steering system to reduce noise. Worm reducer gearboxes can be made and from many different materials. The following three-stage process will explain the components of a low-noise worm reducer gearbox.
Worm gear reducer gearboxes can be mounted at a 90-degree angle to the input worm shaft and are available with various types of hollow or solid output shafts. These reducer gearboxes are especially beneficial for applications where noise reduction is essential. They also have fewer parts and are smaller than other types of reducer gearboxes, making them easier to install.
Worm gear reducer gearboxes are available from various manufacturers. Due to their widespread availability, gear manufacturers maintain extensive inventories of these reducer gearboxes. The worm gear ratio is standard, and the size of the worm gear reducer gearbox is universal. Also, worm gear reducer gearboxes do not need to be sized for a specific purpose, unlike other load interruptions.
A worm gear reducer gearbox is a transmission mechanism with a compact structure, large transmission ratio, and self-locking function under certain conditions. The worm gear reducer gearbox series products are designed with American technology and have the characteristics of stable transmission, strong bearing capacity, low noise, and compact structure. In addition, these products can provide a wide range of power supplies. However, these worm reducer gearboxes are prone to leaks, usually caused by design flaws.
Worm gear reducer gearboxes are available in single-stage and double-stage. The first type consists of an oil tank that houses the worm gear and bearings. The second type uses a worm gear with a sleeve for the first worm gear.
When choosing a gear reducer gearbox, it is essential to choose a high-quality unit. Improper gear selection can cause rapid wear of the worm gear. While worm gear reducer gearboxes are generally durable, their degree of wear depends on the selection and operating conditions. For example, overuse, improper assembly, or working in extreme conditions can lead to rapid wear.
Worm reducer gearboxes reduce speed and torque. Worm gears can be used to reduce the speed of rotating machines or inertial systems. Worm gears are a type of bevel gear, and their meshing surfaces have great sliding force. Because of this, worm gears can carry more weight than spur gears. They are also harder to manufacture. However, the high-quality design of the worm gear makes it an excellent choice for applications requiring high torque and high-speed rotation.
Worm gears can be manufactured using three types of gears. For large reduction ratios, the input and output gears are irreversible. However, the worm reducer gearbox can be constructed with multiple helices. The multi-start worm drive also minimizes braking effects.
Self-locking function
The worm reducer gearbox is self-locking to prevent the load from being driven back to the ground. The self-locking function is achieved by a worm that meshes with the rack and pinion. When the load reaches the highest position, the reverse signal is disabled. The non-locking subsystem back-drives the load to its original position, while the self-locking subsystem remains in its uppermost position.
The self-locking function of the worm reducer gearbox is a valuable mechanical feature. It helps prevent backing and saves the cost of the braking system. Additionally, self-locking worm gears can be used to lift and hold loads.
The self-locking worm gear reducer gearbox prevents the drive shaft from driving backward. It works with the axial force of the worm gear. A worm reducer gearbox with a self-locking function is a very efficient machine tool.
Worm gear reducer gearboxes can be made with two or four teeth. Single-ended worms have a single-tooth design, while double-ended worms have two threads on the cylindrical gear. A multi-boot worm can have up to four boots. Worm reducer gearboxes can use a variety of gear ratios, but the main advantage is their compact design. It has a larger load capacity than a cross-shaft helical gear mechanism.
The self-locking function of the worm reducer gearbox can also be used for gear sets that are not necessarily parallel to the shaft. It also prevents backward travel and allows forward travel. The self-locking function is achieved by a ratchet cam arranged around the gear member. It also enables selective coupling and decoupling between gear members.
high gear ratio
Worm reducer gearboxes are an easy and inexpensive way to increase gear ratios. These units consist of two worm gears – an input worm gear and an output worm gear. The input worm rotates perpendicular to the output worm gear, which also rotates perpendicular to itself. For example, a 5:1 worm gearbox requires 5 revolutions per worm gear, while a 60:1 worm gearbox requires 60 revolutions. However, this arrangement is prone to inefficiency since the worm gear experiences only sliding friction, not rolling friction.
High-reduction applications require many input revolutions to rotate the output gear. Conversely, low input speed applications suffer from the same friction issues, albeit with a different amount of friction. Worms that spin at low speeds require more energy to maintain their movement. Worm reducer gearboxes can be used in many types of systems, but only some are suitable for high-speed applications.
Worm gears are challenging to produce, but the envelope design is the best choice for applications requiring high precision, high efficiency, and minimal backlash. Envelope design involves modifying gear teeth and worm threads to improve surface contact. However, this type of worm gear is more expensive to manufacture.
Worm gear motors have lower initial meshing ratios than hypoid gear motors, which allows the use of smaller motors. So a 1 hp worm motor can achieve the same output as a 1/2 hp motor. A study by Agknx compared two different types of geared motors, comparing their power, torque, and gear ratio. The results show that the 1/2 HP hypoid gear motor is more efficient than the worm gear motor despite the same output.
Another advantage of the worm gear reducer gearbox is the low initial cost and high efficiency. It offers high ratios and high torque in a small package, making it ideal for low to medium-horsepower applications. Worm gear reducer gearboxes are also more shock-resistant.
editor by CX 2023-05-31
China Shunli Custom DC 12V Gear Reduction Motor Worm Right Angle Gearbox Small Geared Motor 2-100 RPM Electric Gearbox Reducer supplier
Guarantee: 3months-1year
Product Amount: GM46EM370
Usage: Electrical Bicycle, Property Appliance, Shunli Customized DC 12V Equipment Reduction Motor Worm Proper Angle Gearbox Small Geared Motor 2-one hundred RPM Electric powered Gearbox Reducer
Sort: Gear MOTOR
Torque: 45 kgf.cm
Design: Long term Magnet
Commutation: Brush
Shield Feature: Entirely Enclosed
Speed(RPM): 1-50rpm
Constant Existing(A): .5A
Performance: Other
Diameter: 32*46mm
Encoder: 11ppr
Gearbox diameter and duration: forty six*32mm
Stall existing: 1.4-1.6A
Rated currrent: Custom-made
Rated Voltage: 6-24V or Customized
Rated torque: Custom-made
Stall torque: Custom-made
Key phrases: 6v dc worm gear motor
Software: Property Applicance
Packaging Details: Polyfoam inside, powerful export carton box outside, with pallet, or as the buyer wished.Shunli Personalized DC 12V Gear Reduction Motor Worm Right Angle Gearbox Modest Geared Motor 2-one hundred RPM Electric powered Gearbox Reducer
DC 12V Gear Reduction Motor Worm Reversible High Torque Turbo Geared Motor 2-one hundred RPM Mayitr Mini Electric Gearbox Reducer
Motor Content
Specification
Gearbox Specialized Date
Advise Merchandise
FAQ1.Q: Are you buying and selling company or producer?A: We are factory. We focus in micro dc motor and dc gear motor for much more than fourteen a long time.2.Q: What is the payment phrase for a new consumer?A: We can attract up an Ali Assurance Get On-line for our new buyer, which can pay on the web with Grasp Card, Broadly utilized NMRV Sequence Worm gear box Pace Reducer Speed Variator Visa, and so on. Client also can pay with PayPal or TT etc.3.Q: I are unable to find a suitable motor on your website, can you customize the motor for me?A: Yes, we can customize a suitable motor in accordance to our customer’s requirements.4.Q: Do you have certificates for the motors?A: Of course, we have CE, FCC, NRV worm velocity reducer reductor ISO, etc. If you have the other certificates requirement, we can apply it for you.5.Q: How is your Quality Manage?A: We have professional examining personnel on each manufacturing line approach. After finishing the complete motor, we have the whole quality device to examination the motor. This sort of as Hardness Tester, 2.5D Graphic Tester, Salt Spray Chamber, Existence Tester, Temperature Examination Equipment, Manufacturing facility Wholesale Undercarriage Spare Elements Sprocket CZPT Pc200 1 Excavator Mini Sprocket PC200 6 and Noise tester and so forth.
Worm gear reducer gearbox
Cheaper than planetary gearboxes In many cases, worm gear reducer gearboxes are a popular alternative to planetary gearboxes. A worm gear reducer gearbox is a mechanical device with vertical input and output shafts. This allows for very high reduction ratios. They are typically used in high-reduction situations such as machine tools.
Worm gears are cheaper than traditional gearboxes. They also have many benefits, including noise reduction. The output shaft of the worm gear reducer gearbox is almost 90 degrees from the motor input shaft, making it ideal for high-torque applications.
The worm gear reducer gearbox adopts an aluminum body, which is light in weight and high in operation efficiency. Additionally, they are available with hollow shafts and mounting flanges. In terms of initial cost, worm gear reducer gearboxes are cheaper than planetary gearboxes. In addition, they have better efficiency and longer service life.
Worm drives are also ideal for portable battery-powered lifting equipment. The high gear ratio of the worm gear ensures that it does not reverse drive. The worm gear has a spring-applied brake that holds the motor in place.
Planetary gearboxes are popular among industrial users. The efficiency of planetary gearboxes is important for practical applications.
The compact worm gear unit consists of a housing with an inner cavity. It has two side walls, one on either side of the front cover (13) and one on both sides of the rear cover (14). The front end cap is screwed onto the housing and the inner cavity is accessed through the rear end cap.
The compact worm gear unit can be configured to suit your application. They have many advantages, including saving space and increasing torque. The range includes single-envelope and double-envelope versions, available in a number of different power ratings. Additionally, they are IP65-rated, making them ideal for applications involving high radial or axial forces.
The compact worm reducer gearbox is a simple but effective worm drive. Its worm gear 16 meshes with the output shaft and rotates relatively stably. It also has a front-end cap and rear bearing. This enables the compact worm reducer gearbox to reduce vibration without damaging the output shaft.
Compact worm gear reducer gearboxes are ideal for many applications and offer high efficiency. The compact design means you can mount them on the motor’s flange or base. Its durable construction makes it ideal for a variety of industries. They are extremely durable and can handle high-pressure and washdown conditions. They also come standard with a synthetic shaft.
high efficiency
High-efficiency worm gear reducer gearboxes are ideal for applications that require precision, repeatability, and efficient performance. These reducer gearboxes are designed with state-of-the-art servo motor technology to provide tight integration and an angular backlash of less than two arc minutes. The reduction ratio can be lower if the application requires it.
Rising energy costs have led to an increased focus on the efficiency of drives. In response to this, manufacturers have increased the efficiency of worm gear reducer gearboxes through a number of technical improvements. By minimizing losses from rolling and sliding friction, worm gear reducer gearboxes are more efficient than their counterparts.
The high-efficiency worm reducer gearbox is simple in design and has the characteristics of a compact structure, high-speed ratio, low power consumption, and self-locking. Other advantages of these reducer gearboxes include low noise and long service life. Many also have built-in control systems that allow manual and remote adjustments. They also feature automatic shutdown protection and thermal protection.
High-efficiency worm reducer gearboxes can be used for mechanical acceleration. The input hypoid gear is usually made of steel, while the output hypoid gear is usually made of bronze. Bronze is a soft metal that is good at absorbing shock loads. However, bronze requires work hardening to achieve optimum hardness. For large worm gears, this process can take 300 to 550 hours.
low clearance
A low-clearance worm reducer gearbox is a device used to adjust the speed of a rotating shaft. It uses a worm gear consisting of two members. One worm is at one end of the shaft and the other is at the other end. Both worms are screwed into the synchronous drive structure.
Low clearance worm gear reducer gearboxes can be produced on conventional worm gear production lines without overlapping investments. These units are usually made of soft rubber. Also, they are relatively quiet in operation. These machines are designed so that they are suitable for use in elevators. The softer material in the worm gear also helps absorb shock loads.
The tooth profile of the worm gear is designed to change with the axial movement of the worm. Worms have thinner right teeth and thicker left teeth. As the worm moves to the right, its teeth mesh with the worm gear, reducing backlash.
There are many different types of worm gears. The design of gears depends on many factors, including backlash, thermal design, friction factors and lubrication. Worm gears are made of several different materials. Some different types of materials used in worm gears require special lubrication.
quieter
The quieter worm reducer gearbox is designed to reduce the noise level of the rotating gear motor. The device has more gear teeth in meshing contact with the gears, which helps it run more quietly. In addition to being quieter than other transmissions, it’s also less expensive than its counterparts.
Worm gearboxes can be used for different applications, but they are not as efficient as helical gearboxes. Worm reducer gearboxes are cheaper but less than 90% efficient. Higher gear ratios reduce efficiency, so worm gear reducer gearboxes are better suited for applications that require low-speed torque. The cost of buying a worm gearbox will depend on the horsepower and gear ratios required.
Worm reducer gearboxes are also more comfortable to use than planetary gearboxes. They don’t vibrate and heat up quickly, making them an excellent choice for low to medium horsepower applications. Worm gear reducer gearboxes can be upgraded to improve their performance by combining with other gear trains or gearboxes.
easy to replace
An easily replaceable worm gear reducer gearbox can save you a lot of money. A worm gear reducer gearbox is part of a chain drive and allows you to change gear ratios quickly and easily. Worm gear reducer gearboxes can be easily replaced in a number of ways. It’s a good idea to read the manufacturer’s manual before replacing a worm gear reducer gearbox. Make sure you have the instructions available so you can refer to them in the future.
Worm gear reducer gearboxes offer many advantages, including long service life and low noise. They are also designed with a 90-degree output shaft for easy installation. Another advantage of these gear reducer gearboxes is that they can be used with both solid and hollow output shafts. This means less maintenance and downtime.
Worm gear reducer gearboxes are widely used. Most gear manufacturers have large inventories. Worm gears also have uniform mounting dimensions. Dimensional consistency means you don’t have to worry about matching the shaft length and diameter to the worm gear. You can easily find a replacement worm gear reducer gearbox for your equipment.
When replacing the worm gear reducer gearbox, check the lubricating oil recommended by the machine. If not included, use original gear oil. Be sure to follow the manufacturer’s instructions carefully.
editor by czh 2023-02-18
China Gear Drive Gearbox for Electric Motor Gear Box Speed Drive China Manufacturer High Quality Good Price Reduction Electric Transmission Part Alloy Stainless Steel bevel vs worm gearbox
Solution Description
Equipment Drive Gearbox for Electrical Motor Equipment Box Speed Push China Manufacturer Higher High quality Very good Price tag Reduction Electric powered Transmission Part Alloy Stainless Metal
|
US $10-99 / Piece | |
100 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Three-Ring |
| Hardness: | Hardened Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | Stepless |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
|
US $10-99 / Piece | |
100 Pieces (Min. Order) |
###
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Three-Ring |
| Hardness: | Hardened Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | Stepless |
###
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) |
|---|
What is a worm gear reducer gearbox?
The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
Hollow shaft worm gear reducer gearbox
Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear
The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
Double throat worm gear
There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear
The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
Brass worm gear
Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.
editor by czh 2023-02-01
China Electric Motor Gear Box, Gear Unit Manufacturer, Worm Reduction Gearbox wholesaler
Product Description
Electric Motor Equipment Box, Gear Device Company, Worm Reduction Gearbox
Functions:
one. Compact structure and basic assembly
2. Extensive velocity ranges and large torque
three. Minimal sounds, good sealing performance, high efficiency
four. Secure and safe, prolonged lifetime, common
five. Multi-framework, numerous assembling techniques
Solution image:
Specification:
| ANG WP Worm Speed Gear box | |
| Design | WPA WPS WPDA WPDS WPO WPX… |
| Size | 40-250(one phase) |
| Enter energy | .12kw ~ 33kw |
| Enter velocity | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/sixty(solitary phase) |
| Enter motor | AC (1 section or 3 period) / DC motor |
| Output torque | six-6050Nm |
| Set up variety | Foot / Sound shaft / Hollow shaft… |
| Material of housing | Die-solid iron |
| Application | Foods Things, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, and so on. |
FAQ
Q: Can you make the equipment box with customization?
A: Indeed, we can personalize for each your request, like flange, shaft, configuration, content, and many others.
Q: Do you supply samples?
A: Yes. Sample is obtainable for testing.
Q: What is your MOQ?
A: It is 10pcs for the commencing of our enterprise.
Q: What is your direct time?
A: Common product require 5-30days, a little bit for a longer time for customized goods.
Q: Do you offer technologies support?
A: Of course. Our firm have style and growth group, we can give technological innovation help if you
want.
Q: How to ship to us?
A: It is offered by air, or by sea, or by teach.
Q: How to shell out the funds?
A: T/T and L/C is favored, with different forex, like USD, EUR, RMB, and many others.
Q: How can I know the product is suited for me?
A: >1ST verify drawing and specification >2nd check sample >3rd commence mass manufacturing.
Q: Can I appear to your business to visit?
A: Of course, you are welcome to pay a visit to us at any time.
Q: How shall we speak to you?
A: You can send inquiry directly, and we will reply inside 24 hours.
|
US $15-25 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Right Angle |
| Gear Shape: | Cylindrical Gear |
| Step: | Single-Step |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| ANG WP Worm Speed Gear box | |
| Model | WPA WPS WPDA WPDS WPO WPX… |
| Size | 40-250(single stage) |
| Input power | 0.12kw ~ 33kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/60(single stage) |
| Input motor | AC (1 phase or 3 phase) / DC motor |
| Output torque | 6-6050Nm |
| Install type | Foot / Solid shaft / Hollow shaft… |
| Material of housing | Die-cast iron |
| Application | Food Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc. |
|
US $15-25 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Right Angle |
| Gear Shape: | Cylindrical Gear |
| Step: | Single-Step |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| ANG WP Worm Speed Gear box | |
| Model | WPA WPS WPDA WPDS WPO WPX… |
| Size | 40-250(single stage) |
| Input power | 0.12kw ~ 33kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/10 ~ 1/60(single stage) |
| Input motor | AC (1 phase or 3 phase) / DC motor |
| Output torque | 6-6050Nm |
| Install type | Foot / Solid shaft / Hollow shaft… |
| Material of housing | Die-cast iron |
| Application | Food Stuff, Ceramics, Chemical, Packing, Dyeing, Woodworking, Glass, etc. |
Worm Reducer
Worm reducers are commonly used to reduce the Agknx produced by a rotating shaft. They can achieve reduction ratios of five to sixty. In contrast, a single-stage hypoid gear can achieve up to a 120:1 reduction ratio. For further reduction, another type of gearing is used. So, a single stage worm reducer cannot achieve higher ratios than these.<br
Mechanics
A worm reducer is an auxiliary mechanical device that uses worms to reduce the size of a rotating shaft. These worms have a range of tooth forms. One form is a line weave twist surface. Another is a trapezoid based on a central cross section. The trapezoid can be perpendicular to the tooth cross section, or it can be normal to the root cross section. Other forms include involute helicoids and convolute worms, which use a straight line intersecting the involute generating line.
Worm gears are lubricated with a special lubricant. Because worm gears are complex, it’s important to use the correct lubricant. Worm gear manufacturers provide approved lubricants for their gears. Using unapproved gear oil can damage your reducer’s efficiency. The right lubricant depends on several factors, including load, speed, duty cycle, and expected operating temperatures.
The efficiency of a worm gear reducer depends on several factors, including losses at gear mesh, losses in the bearings, and windage in the oil seal lip. In addition, the worm gear reducer’s efficiency varies with ambient temperature and operating temperature. The worm gear reducer’s efficiency can also vary with the ratio of the load. Moreover, worm gear reducers are subject to break-in.
Worm gear reducers are used in many different applications. They are typically used in small electric motors, but they’re also used in conveyor systems, presses, elevators, and mining applications. Worm gears are also commonly found in stringed musical instruments.
Worm gears have excellent reduction ratios and high Agknx multiplication, and they’re often used as speed reducers in low to medium-speed applications. However, the efficiency of worm gear reducers decreases with increasing ratios.
Sizes
Worm reducers come in different sizes and tooth shapes. While the tooth shape of one worm is similar to the other, different worms are designed to carry a different amount of load. For example, a circular arc worm may have a different tooth shape than one with a secondary curve. Worm gears can also be adjusted for backlash. The backlash is the difference between the advancing and receding arc.
There are two sizes of worm reducers available from Agknx Transmission. The SW-1 and SW-5 models offer ratios of 3.5:1 to 60:1 and 5:1 to 100:1 respectively. The size of the worm reducer is determined by the required gear ratio.
Worm gears have different thread counts. One is based on the central cross-section of the worm, and the other is on the right. Worm gears can have either a single or double thread. Single-threaded gears will reduce speed by 50 percent, while double-threaded gears will reduce speed by 25 percent.
Worm gear reducers are lightweight and highly reliable. They can accommodate a variety of NEMA input flanges and hollow output bore sizes. Worm reducers can be found at 6 regional warehouses, with prepaid freight. To make a purchasing decision, you should consider the horsepower and Agknx requirements of your specific application.
Applications
The Worm Reducer market is a global business that is dominated by the North American and European regions. The report provides in-depth information on the market trends, key challenges, and opportunities. It also examines the current state of the industry and projects future market growth. The report is organized into segments based on product type, major geographical regions, and application. It also presents statistics and key data about the market.
Worm gear reducers have many applications. They can be used to increase the speed of convey belts. They also help reduce noise. Worm gears have many teeth that touch the gear mesh, which makes them quieter. Moreover, the worm gears require only a single stage reducer, reducing the number of moving parts in the system.
The worm gear has long life and is suitable for different industries. It is a perfect choice for elevators and other applications that need fast stopping and braking. Its compact size and ability to hold a load make it suitable for these applications. It also prevents the load from free-falling as a result of a sudden braking. Worm gears can also be used in heavy-duty machinery such as rock crushers.
Worm gears are similar to ordinary gears except that they transfer motion at a 90-degree angle. As a result, the worm gears are extremely quiet, making them a suitable option for noise sensitive applications. They are also excellent for low-voltage applications, where the noise is critical.
Worm gears are ideal for applications with space restrictions, because they require fewer gear sets. The worm gears also allow for a smaller gearbox size. Consequently, they are the perfect choice for machines that are space-constrained, such as conveyors and packaging equipment.
Cost
The lifespan of a worm gear reducer is comparable to other gear reducers. Worm gears have a long history of innovation and use in various industries, from shipbuilding to automobile manufacturing. Today, these gear reducers are still popular with engineers. However, there are some things to keep in mind before buying one.
In the first place, a worm reducer needs to be affordable. Generally, a worm reducer costs about $120. The price varies with the brand name and features. Some products are more expensive than others, so be sure to shop around for the best price. In addition, it is important to consider the quality and design of the worm reducer before making a purchase.
Worm gear manufacturers have made significant advancements in materials, design and manufacturing. These advancements, along with the use of advanced lubricants, have resulted in significant increases in efficiency. For example, double enveloping worm gear reducers have improved efficiency by three to eight percentage points. This improvement was achieved through rigorous testing of manufacturing processes and materials. With these improvements, worm gear reducers have become more desirable in today’s market.
Worm reducers are extremely versatile and reliable, and are available in a variety of sizes. Domestic manufacturers usually stock a large selection of reducers, and are often able to ship them the same day you place your order. Most major domestic worm gear reducer manufacturers also share some critical mounting dimensions, such as the output shaft diameter, the mounting hole location, and the overall reducer housing height. Most manufacturers also offer standardized gear ratios. Some manufacturers have also improved gear design and added synthetic lubricants for better performance.
In addition, different tooth shapes of worms can increase their load carrying capacity. They can be used on secondary curves and circular arc cross sections. Moreover, the pitch point defines the boundary of the cross section. The mesh on the receding arc is smoother than that of the advancing arc. However, in the case of negative shifting, most of the mesh is on the receding arc.
Self-locking function
A worm reducer has a self-locking function. When a worm is fitted with all of its addendum teeth, the total number of teeth in the system should be greater than 40. This self-locking function is achieved through the worm’s rack and pinion mechanism. The worm’s self-locking feature can prevent the load from being dropped and is useful for many applications.
The self-locking function of a worm reducer is possible for two main reasons. First of all, a worm reducer uses two or more gears. One gear is placed at the input, and the other gear runs the output shaft. This mechanism produces a torque, which is transmitted to a spur gear.
Worm reducers can be used in a variety of industrial applications. Because of their self-locking function, they are useful for preventing back-driving. They are also helpful for lifting and holding loads. Their self-locking mechanism allows for a large gear reduction ratio without increasing the size of a gear box.
Self-locking gears can be used to prevent back-driving and inertial driving. This is useful for many industries and can prevent backdriving. However, one major disadvantage of self-locking gears is their sensitivity to operating conditions. Lubrication, vibration, and misalignment can affect their reliability.
Embodiments of the invention provide a self-locking mechanism that prevents back-driving but allows forward-driving. The self-locking mechanism may comprise first and second ratchet cams disposed about a gear member. A releasable coupling member may be interposed between the gear member and the ratchet cam. This facilitates selective coupling and decoupling.
The worm reducer has several advantages. Its compact design is ideal for many mechanical transmission systems. It also provides greater load capacity than a cross-axis helical gear mechanism.
editor by czh 2022-12-01
China Good quality CZPT DC 3-6V Mini Electric Reduction Plastic DC Gear Motor dc geared motor For Intelligent Robots Toy with Free Design Custom
Warranty: Other, 30 days
Model Number: dc geared motor
Type: GEAR MOTOR
Speed(RPM): standard
Continuous Current(A): standard
Condition: 100% new
Lead time: Instock
Port: China
Products Description Operating voltage: 3V to 6V DC (recommended operating voltage of about 6 to 8V) Maximum torque: 800gf cm min (when it is 3V) No-load speed: 1:48 (when it is 3V) Load current: 70mA (250mA MAX) (when it is 3V) This motor with EMC, anti-interference ability. SCM is a non-interference. EMC contrast with the general Canadian EMC’s current is too large, the impact of robot operation, the MCU does not often work. Reduction ratio: 1:48 Torque: 0.8 KG/CM Working voltage: 3-6v. HOT SALE Company Introduction Southern electronics tech ltd Established in 2002, is a specialized global market distributor and broker of all electronic components and sourcing requirements. We are dedicated to providing our customers with impeccable service, quality and price.We offers an array of memory & semiconductor products. They include hard to find, obsolete Ics, chip tantalum capacitor, chip ceramic capacitor, chip resistor, diodes and transistor. Although our specialized service is in electronic components, our sourcing capabilities allow us to fulfill virtually any product requirement. Whether, you are seeking to eliminate channels or simply trying to reduce cost, southern electronics tech ltd is the ” One Stop Shop” for all your sourcing needs. Southern electronics tech ltd Established in 2002, is a specialized global market distributor and broker of all electronic components and sourcing requirements. We are dedicated to providing our customers with impeccable service, quality and price.We offers an array of memory & semiconductor products. They include hard to find, obsolete Ics, chip tantalum capacitor, chip ceramic capacitor, chip resistor, diodes and transistor. Although our specialized service is in electronic components, our sourcing capabilities allow us to fulfill virtually any product requirement. Whether, you are seeking to eliminate channels or simply trying to reduce cost, southern electronics tech ltd is the ” One Stop Shop” for all your sourcing needs. Our Services & Strength We will impress you with superior quality product, effective service， make our clients feel that we are trustworthy. Our customers Payment information We accept payment via the Paypal /Western union/TT/ Escrow service, you can choose as you like.We accept payment via the Paypal /Western union/TT/ Escrow service, you can choose as you like. Shipping 1. We will ship the products within 3 working days after the payment confirmed.2. Shipment term: Ship via DHL, FEDEX, UPS, TNT,EMS express, and son on, depends on customer’s requirement. Attention 1. We are not responsible for any accidents, delays or other issues caused by the forwarder.2. Any import fees or charges are paid by buyer. 3. We appreciate your business and offer an instant 7 days return policy. (7 days after receiving the products). 4. If the products you purchase from our store have problem, they don’t work electronically to manufacturers specifications, simply return them to us for replacement or refund. 5. If the products are defective, please notice us within 3 days of delivery. 6. Any products must be returned in their original condition to qualify for a refund or replacement.7. The buyer is responsible for all the shipping cost incurred. Contact Us If you have any question, please feel free to contact us via the following ways or Trademanager anytime. Southern Electronics Tech LtdAdress: 6P Rm, Block B, Modern window Building Huaqiang Rd,Xihu (West Lake) Dis. District HangZhou, GD, China, 518031Contact: MaryTel: 86~571-8822571/8822 0571 -83259571Fax: 86~571-8822571/8822 0571 -82815571Email: [email protected]: mashaohua2005Webside: Title goes here.Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding MachinePET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Dynamic Modeling of a Planetary Motor
A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.
planetary gear system
A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
planetary gear train
To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?
planetary gear train with fixed carrier train ratio
The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
planetary gear train with zero helix angle
The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!
planetary gear train with spur gears
A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
planetary gear train with helical gears
A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.
china supplier Factory Wholesale 110mm 12V 24V 48V 230W 400W 700W Electric Right Angle DC Worm Gear Reduction Motor with Encoder manufacturers
Solution Description
| BG 110ZYT DC Brushed CZPT | |
| Environmental Situations | -20ºC~50ºC |
| Insulation Clase | B |
| Protection class | IP44 |
| Sounds | ≤65dB |
| Number of phases | Single |
| Lifespan | >1000h |
| Electrical Requirements | |||||||||
| Product | RATED LOAD | NO LOAD | STALL | ||||||
| Voltage | Power | Speed | Torque | Current | Speed | Existing | Torque | Current | |
| V | W | rpm | N.m | A | rpm | A | N.m | A | |
| BG 110ZYT24 | 24 | 400 | 1500 | 2.five | 25 | 1800 | five | 7.5 | 75 |
| Gear CZPT CZPT nical Knowledge-BG | ||||||||||||
| Ratio | seven.five | 9 | twelve.5 | 15 | 18 | 25 | 30 | fifty | 75 | 100 | 120 | 180 |
|
Rated speed(rpm) |
400 | 333 | 240 | 200 | 166 | one hundred twenty | one hundred | 60 | 40 | 30 | 25 | sixteen |
|
Rated torque(N.m) |
three.92 | nine.eighty three | 13.six | eight.seven | 10.four | fourteen.five | 17.four | 31.three | 39.2 | fifty two.2 | 60 | 60 |
Recognized in 1994, HangZhou BG CZPT Factory is a skilled producer of brushless DC motors, brushed DC motors, planetary gear motors, CZPT motors, CZPT motors and AC motors. We have a plant spot of 6000 square meters, multiple patent certificates, and we have the unbiased design and improvement capabilities and robust specialized drive, with an once-a-year output of a lot more than 1 million models. Considering that the starting of its institution, BG motor has targeted on the total remedy of motors. We manufacture and layout motors, provide professional CZPT ized services, respond swiftly to CZPT er wants, and actively aid CZPT ers to fix problems. Our motor goods are exported to 20 countries, like the CZPT States, Germany, CZPT , the CZPT CZPT dom, Poland, Slovenia, Switzerland, Sweden, Singapore, South Korea etc.
Our founder, Mr. CZPT , has more than 40 several years of experience in motor technologies, and CZPT other engineers also have more than fifteen years of encounter, and 60% of CZPT workers have more than ten a long time of expertise, and we can assure you that the good quality of CZPT motors is leading notch.
The merchandise protect AGV, underwater robots, robots, sewing device sector, cars, health-related gear, computerized doors, lifting products, industrial gear and have a vast selection of applications.
We attempt for excellence in the quality of each and every product, and we are only a tiny and advanced manufacturer.
Our vision: CZPT the planet ahead and make life greater!
Q:1.What sort of motors can you offer?
A:At existing, we largely produce brushless DC motors, brush DC motors, AC motors, CZPT CZPT s the CZPT of the motor is considerably less than 5000W, and the diameter of the motor is not more than 200mm
Q:2.Can you send me a price tag record?
A:For all of CZPT motors, they are CZPT ized based mostly on various demands like life time, sounds,voltage,and shaft etc. The value also varies in accordance to yearly amount. So it truly is genuinely challenging for us to give a value record. If you can share your detailed requirements and annual amount, we will see what offer we can give.
Q:3.Can l get some samples?
A:It depends. If only a few samples for personalized use or replacement, I am afraid it’ll be hard for us to give since all of CZPT motors are CZPT produced and no stock CZPT if there are no even more demands. If just sample tests ahead of the official buy and CZPT MOQ,cost and other conditions are suitable,we might adore to give samples.
Q4:Can you supply CZPT or ODM provider?
A:Of course,OEM and ODM are equally CZPT , we have the skilled R&D dept which can provide professional answers for you.
Q5:Can l check out your manufacturing facility ahead of we area an buy?
A:welcome to check out CZPT factory,dress in every single pleased if we have the possibility to know each other more.
Q:6.What is actually the guide time for a regular order?
A:For orders, the common lead time is 15-twenty days and this time can be shorter or CZPT er primarily based on the different model,interval and quantity.
Gearboxes are mechanical devices that aid generate methods keep ideal velocity and torque for apps. Also known as gearboxes and gear drives, they reduce the rotational speed of the input shaft by a specified share and increase the electricity shipped to the output shaft by the same share. Ratio multipliers enhance the deceleration and torque provided by the reducer by a specific ratio and are ideal for parallel installations. Mounting bases, torque arms and flange couplings are equipment utilised with the reducer. They are normally used in programs exactly where the reducer is not straight linked to the generate system.
china wholesaler Factory Wholesale 63mm 12V 24V 36V 52W 25rpm Electric Right Angle DC Worm Gear Reduction Motor with Encoder manufacturers
Solution Description
| BG 63ZYT DC Brushed CZPT | |
| Environmental Circumstances | -20ºC~50ºC |
| Insulation Clase | B |
| Safety class | IP44 |
| Sound | ≤65dB |
| Quantity of phases | Single |
| Lifespan | >1000h |
| Electrical Requirements | |||||||||
| Model | RATED LOAD | NO LOAD | STALL | ||||||
| Voltage | Power |
Speed |
Torque | Current | Speed | Current | Torque | Current | |
| V | W | rpm | N.m | A | rpm | A | N.m | A | |
| BG 63ZYT | 24 | 52 | 25 | twenty | 2.seventeen | one hundred fifty | one | 60 | 6.fifty one |
| BG 63ZYT-01 | 24 | seventy eight | 50 | 10 | three.25 | two hundred | one.five | 30 | 9.seventy five |
| We can also CZPT ize products according to CZPT er requirements. | |||||||||
| Gear CZPT CZPT nical Info-BG | ||||||||
| Ratio | 3.three | 4.six | 37.7 | fifty two.one | 70 | 585 | 810 | 2911 |
| NO-load pace | 1363 | 978 | 119 | 86 | sixty four | eight | five.5 | two.3 |
| Rated pace(rpm) | 1151 | 826 | a hundred | seventy three | sixty four | six.5 | four.5 | 1.9 |
| Rated torque | .571 | .041 | .32 | .forty four | .52 | 2 | 2 | 2 |
Recognized in 1994, HangZhou BG CZPT Factory is a expert manufacturer of brushless DC motors, brushed DC motors, planetary equipment motors, CZPT motors, CZPT motors and AC motors. We have a plant location of 6000 sq. meters, a number of patent certificates, and we have the impartial layout and growth capabilities and powerful specialized drive, with an yearly output of much more than 1 million models. Considering that the beginning of its institution, BG motor has concentrated on the all round resolution of motors. We manufacture and layout motors, give skilled CZPT ized solutions, answer quickly to CZPT er demands, and actively help CZPT ers to resolve issues. Our motor products are exported to twenty nations, such as the CZPT States, Germany, CZPT , the CZPT CZPT dom, Poland, Slovenia, Switzerland, Sweden, Singapore, South Korea etc.
Our founder, Mr. CZPT , has far more than forty several years of knowledge in motor technology, and CZPT other engineers also have much more than fifteen many years of knowledge, and sixty% of CZPT workers have a lot more than ten years of encounter, and we can assure you that the high quality of CZPT motors is best notch.
The goods go over AGV, underwater robots, robots, sewing machine business, automobiles, health care equipment, computerized doors, lifting products, industrial products and have a broad range of applications.
We try for excellence in the top quality of every item, and we are only a modest and refined company.
Our eyesight: CZPT the planet ahead and make daily life greater!
Q:1.What sort of motors can you give?
A:At existing, we primarily create brushless DC motors, brush DC motors, AC motors, CZPT CZPT s the CZPT of the motor is considerably less than 5000W, and the diameter of the motor is not a lot more than 200mm
Q:2.Can you deliver me a cost record?
A:For all of CZPT motors, they are CZPT ized based on diverse specifications like lifetime, sounds,voltage,and shaft and so forth. The price also varies in accordance to annual amount. So it’s really difficult for us to supply a price tag listing. If you can share your in depth needs and once-a-year amount, we will see what offer you we can offer.
Q:3.Can l get some samples?
A:It is dependent. If only a few samples for personalized use or substitution, I am afraid it will be difficult for us to supply because all of CZPT motors are CZPT made and no stock CZPT if there are no more requirements. If just sample testing prior to the official order and CZPT MOQ,price tag and other conditions are appropriate,we might enjoy to offer samples.
Q4:Can you provide CZPT or ODM service?
A:Sure,OEM and ODM are each CZPT , we have the specialist R&D dept which can provide professional solutions for you.
Q5:Can l check out your manufacturing unit before we location an get?
A:welcome to visit CZPT manufacturing unit,put on each and every pleased if we have the chance to know each and every other far more.
Q:6.What’s the lead time for a standard get?
A:For orders, the normal direct time is 15-twenty days and this time can be shorter or CZPT er based mostly on the different model,period of time and quantity.
The expression “gearbox” is used to refer to any device that connects a motor to a equipment and is made up of a collection of gears, also acknowledged as a equipment set. It gets the main enter velocity from the motor and modifications it to a different output pace employing its gears. Different varieties and combos of gears serve specific reasons. The kinds of gears found in gearboxes consist of spur gears, bevel gears, helical gears, helical gears and worm gears. The functionality effectiveness of a gearbox is represented by the gearbox ratio, which is the ratio of the velocity of the input source to the velocity of the output source
china price Sewing Gear Helical Box Gears Pinion Fixie Bike Fixed Plastic Motor Shift Knobs Reducer Planetary Electric Motor with Reduction Motorcycle Cutting Machines manufacturers
Product Description
CZPT gear CZPT cal box gears pinion fixie bike set plastic motor shift knobs reducer planetary electric motor with reduction motorbike slicing machines
Gearboxes and reducers are enclosed mechanical reduction devices frequently employed in today’s automated management systems to command torque from your motors and accomplish other motion-connected duties. A gearbox makes it possible for you to improve torque while lowering the speed of your primary mover output shaft. The output shaft of the gearbox rotates at a slower velocity than the enter shaft. This results in a mechanical advantage, increasing torque. Conversely, your gearbox can be established in reverse, delivering elevated shaft speed and lowered torque. Two frequent transmission configurations are straight and correct angle. Online models usually consist of helical or spur gears, planetary gears, cycloidal mechanisms, or harmonic turbines. Right-angle designs normally use worm or helical gear drives, however, hybrid drives are also obtainable. Gearmotors merge an enclosed gear set with an electric motor to increase torque and performance whilst minimizing velocity. While extra friction, inertia, or sharp load changes for limited-phrase procedure of the actuator can lead to difficulties, they supply a extended functioning existence by preventing overloading. A variety of equipment ratios, speeds and torques are obtainable to help improve functionality and reduce prospective issues. Search to locate the right gearbox and reducer for your automation venture.
china shop Gear Shift Cycle Speed Motorcycle Fixed Helical Box Cutting Machines Planetary Reducer Smart Watch Electric Motor with Reduction manufacturers
Item Description
Equipment Change Cycle CZPT CZPT cycle Fixed CZPT cal Box Reducing CZPT s Planetary Reducer Wise Observe CZPT ctric CZPT with Reduction
These compact, lightweight, low backlash inline equipment reducers were originally designed for encoder applications. They are also suitable for numerous other drive techniques. Encoder gear reducers have a quite minimal second of inertia at the shaft input and are rated for enter speeds up to 3000 rpm. Two frame sizes are available with gear ratios from 4.ninety six:1 to 3600:1. Our encoder gearbox sync pads are accessible from stock.
china manufacturer manufacturer supplier Bicycle Gear Shifter Wheel Reducer Gears Set Internal Hub Loader Planetary Camping Accessories Game Electric Motor with Reduction manufacturers
Product Description
Bicycle equipment shifter wheel reducer gears established interior hub loader planetary tenting equipment sport electric motor with reduction
Beneath is a list of our at the moment obtainable industrial gearboxes. If you can not discover what you are looking for, remember to get in touch with the manufacturing unit for much more choices. At EP, we are consistently developing new products and retrofitting old ones to fulfill client specifications.