SHN Motors
1.Characteristics
one). Higher effectiveness
two). Lengthy functioning life
three). Low noise
four). Good temperature increase
5). Very good equilibrium
six). The most CZPT design and style for the optimized operating.
2.Associated Requirements
1) 42mm series
| Model | DMW421 | DMW422 | DMW423 | |
| Voltage | V | 24 | ||
| No load speed | rpm | 5000 | 5000 | 5000 |
| Rated torque | Nm | .063 | .094 | .one hundred twenty five |
| Rated Speed | rpm | 4000 | 4000 | 4000 |
| Rated Current | A | one.7 | 2.5 | three.5 |
| Torque(max) | Nm | .19 | .27 | .38 |
| Back again-EMF constant | V/Krpm | 3.thirteen | 3.13 | 3.15 |
| Torque Constant | Nm/A | .039 | .04 | .04 |
| Resistance | ohm | one.five | .53 | .74 |
| Bodyweight | Kg | .3 | .four | .five |
| Length | mm | forty one | 51 | 6 |
two) 70mmSeries
| Model | Rated Voltage | No load speed |
Rated torque | Rated Speed | Rated Present |
Rated electricity |
L |
| VDC | RPM | Nm | rpm | A | W | mm | |
| DMW701 | forty eight | 3500 | .five | 3000 | four.three | 157 | 86 |
| DMW702 | forty eight | 3500 | 1 | 3000 | 8.7 | 314 | 116 |
| DMW703 | forty eight | 3500 | 1.5 | 3000 | twelve.nine | 471 | 136 |
three) 80mmSeries
| Product | DMW801 | DMW802 | DMW803 | |
| Voltage | V | 24 | ||
| No load speed | rpm | 4200 | 4200 | 4200 |
| Rated torque | Nm | .twenty five | .five | .seventy five |
| Rated Speed | rpm | 3000 | 3000 | 3000 |
| Rated Current | A | 5.2 | 10.five | fifteen |
| Rated power | W | 79 | 157 | 236 |
| Again-EMF constant | V/Krpm | nine | 9.2 | nine.5 |
| Torque Constant | Nm/A | .06 | .052 | .05 |
| Resistance | ohm | .five | .43 | .35 |
| Weight | Kg | one.six | two.2 | three |
| Length | mm | 75 | 95 | 115 |
four) 86mmSeries
| Model | DMW861 | DMW862 | DMW863 | |
| Voltage | V | forty eight | ||
| No load speed | rpm | 3500 | 3500 | 3400 |
| Rated torque | Nm | 1. | 1.eight | 2.5 |
| Rated Speed | rpm | 3000 | 3000 | 3000 |
| Rated Current | A | 8.6 | 14.eight | 20 |
| Torque(max) | Nm | three. | five.four | seven.5 |
| Again-EMF constant | V/Krpm | nine.eight | nine.eight | 10 |
| Torque Constant | Nm/A | .thirteen | .13 | .14 |
| Resistance | ohm | .32 | .fifteen | .one |
| Excess weight | Kg | 2.2 | 3.2 | four.2 |
| Length | mm | 80 | 105 | one hundred thirty |
five) 60mmSeries
| Product | DMW601 | DMW602 | DMW603 | |
| Voltage | V | 36 | ||
| No load speed | rpm | 4100 | 4100 | 4100 |
| Rated torque | Nm | .25 | .five | .75 |
| Rated Speed | rpm | 3000 | 3000 | 3000 |
| Rated Current | A | 3 | 6 | nine |
| Torque(max) | Nm | .seventy five | 1.5 | 2 |
| Back-EMF constant | V/Krpm | six.two | 6.five | six.five |
| Torque Constant | Nm/A | .043 | .045 | .041 |
| Resistance | ohm | .fifty nine | .26 | .two |
| Bodyweight | Kg | .nine | one.2 | 1.six |
| Duration | mm | 78 | 99 | 120 |
six) 57mm Sequence
| Model | DMW571 | DMW572 | DMW573 | DMW574 | ||
| Voltage | V | 36 | ||||
| No load speed | rpm | 5200 | 5200 | 5300 | 5400 | |
| Rated torque | Nm | .eleven | .22 | .32 | .42 | |
| Rated Speed | rpm | 4000 | 4000 | 4000 | 4000 | |
| Rated Current | A | 1.eight | three.two | 4.seven | 6.5 | |
| Torque(max) | Nm | .3 | .5 | .eight | one.2 | |
| Back-EMF constant | V/Krpm | four.5 | four.eight | 4.83 | 4.9 | |
| Torque Constant | Nm/A | .072 | .078 | .08 | .09 | |
| Resistance | ohm | one.7 | .seventy five | .5 | .39 | |
| Weight | Kg | .forty five | .eight | 1.one | one.4 | |
| Duration | mm | fifty five | 75 | 95 | 115 | |
7) 57 Substantial Torque
| Model | DMW571 | DMW572 | DMW573 | DMW574 | |
| Voltage | V | 36 | |||
| No load speed | rpm | 5200 | 5200 | 5200 | 5200 |
| Rated torque | Nm | .14 | .28 | .forty three | .49 |
| Rated Speed | rpm | 4000 | 4000 | 4000 | 4000 |
| Rated Current | A | two.2 | four.five | six.8 | 7.9 |
| Torque(max) | Nm | .four | .6 | .nine | one.five |
| Again-EMF constant | V/Krpm | 4.five | 4.8 | four.83 | four.nine |
| Torque Constant | Nm/A | .072 | .078 | .08 | .09 |
| Resistance | ohm | two | .9 | .seven | .five |
| Excess weight | Kg | .5 | .9 | one.three | one.8 |
| Duration | mm | 55 | 75 | 95 | 115 |
three.Outlines/Drawings
4.About US
5.Main Products
six.Package deal and Shipping
one.FedEX / DHL / UPS / TNT for samples,CZPT to door support
two.By sea for batch goods
three.CZPTs specifying freight CZPTers or negotiable delivery techniques
4.Shipping and delivery Time:20-25 Days for samples30-35 Days for batch items
five.Payment Phrases:T/T,L/C at sight,D/P and many others.
seven.FAQ
Q1. When can I get the quotation?
We typically quote within 24 several hours right after we get your inquiry.
If you are urgent to get the price tag, please send the message on and or contact us right.
Q2. How can I get a sample to check your high quality?
After value confirmed, you can requiry for samples to check high quality.
If you want the samples, we will charge for the sample value.
But the sample expense can be refundable when your quantity of first purchase is previously mentioned the MOQ
Q3. Can you do OEM for us?
Sure, the product packing can be developed as you want.
This fall. How about MOQ?
one pcs for carton box.
Q5. What is your principal industry?
CZPT CZPTpe, Southeast Asia, South America.
Please feel free to make contact with us if you have any concern.
